[cisco-voip] Router to Dial POTS line

[Jason Aarons (US)]

Debug vpm signal

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Jeff Ruttman
Sent: Thursday, May 14, 2009 2:27 PM
To: cisco-voip
Subject: [cisco-voip] Router to Dial POTS line

 

Greetings,

 

We have an analog line here which I'm setting up for 911 dialing.

 

The line itself works as I can call out with a buttset just fine.  We
have everything configured on the router and in Call Manager.  But it
doesn't work; we get a fast busy.  I want to see if my problem is the
router config or CM, so I'm trying to place a call from the router
thinking that would rule out the router config.

 

I've got the analog line plugged into the 0 port in the FXO card.  I put
"destination-pattern 9T" on the dial-peer as it was part of some example
I found in a cisco doc for dialing out from a router.  The rest of the
configs match a config from another site.

 

voice-port 0/1/0

 timeouts call-disconnect 5

 timeouts wait-release 5

 timing hookflash-out 500

 description 911 Dialing

 

dial-peer voice 999010 pots

 service mgcpapp

 destination-pattern 9T

 port 0/1/0

 

Anyway, I get this when I place a call:

 

Router#csim start 95555555

csim: called number = 95555555, loop count = 1 ping count = 0

 

csim err:csim_do_test invalid major major(16) minor(0)

csim: loop = 1, failed = 0

csim: call attempted = 1, setup failed = 0, tone failed = 0

 

Any insight out there?

 

Thanks

jeff

 

 

 

CONFIDENTIALITY NOTICE: The information contained in this email
including attachments is intended for the specific delivery to and use
by the individual(s) to whom it is addressed, and includes information
which should be considered as private and confidential. Any review,
retransmission, dissemination, or taking of any action in reliance upon
this information by anyone other than the intended recipient is
prohibited. If you have received this message in error, please reply to
the sender immediately and delete the original message and any copy of
it from your computer system. Thank you.




-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090514/b6220b19/attachment.html>