[cisco-voip] Setting Up A 3825 Router for VOIP?

[Miller, Steve]

I am looking to set up a router for the first time. In our test lab, it
will be using POTS lines into an FXO card for outside dialing.  Is there
a good place to go to find out exactly how the router should be set up
for this type of programming with POTS lines and the Call Manger?  Is
the programming different for CCM4.1 and CUCM 7.X?  Please point me in
the right direction.  If there is some kind of "step by step" document
for router setup, that would be awesome.
 

Steve Miller
Telecom Engineer
Dickstein Shapiro LLP
1825 Eye Street NW | Washington, DC 20006
Tel (202) 420-3370| Fax (202) 330-5607
MillerS at dicksteinshapiro.com 

 

--------------------------------------------------------
This e-mail message and any attached files are confidential and are intended solely for the use of the addressee(s)
named above. This communication may contain material protected by attorney-client, work product, or other 
privileges. If you are not the intended recipient or person responsible for delivering this confidential
communication to the intended recipient, you have received this communication in error, and any review, use, 
dissemination, forwarding, printing, copying, or other distribution of this e-mail message and any attached files 
is strictly prohibited. Dickstein Shapiro reserves the right to monitor any communication that is created, 
received, or sent on its network.  If you have received this confidential communication in error, please notify the 
sender immediately by reply e-mail message and permanently delete the original message. 

To reply to our email administrator directly, send an email to postmaster at dicksteinshapiro.com

Dickstein Shapiro LLP
http://www.DicksteinShapiro.com

==============================================================================
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090515/c8da6226/attachment.html>