[cisco-voip] Cube and dial peer busyout

[Ian MacKinnon]

Hi all,

I have got SIP dial peers with out of band SIP options working to monitor remote service availabilty.
Ie:
dial-peer voice 200000 voip
voice-class sip options-keepalive

And i can see the state change from active to busyout with either "show dial-peer voice summary" or show dial-peer 200000 | inc keepalive

So far so good :)


What I can't find is any way of monitoring this remotely.
I can't find an OID for a snmpget, or find a trap

Has anybody got this working?

Thanks
Ian


________________________________
--

This email and any files transmitted with it are confidential and intended
solely for the use of the individual or entity to whom they are addressed.
If you have received this email in error please notify the sender. Any
offers or quotation of service are subject to formal specification.
Errors and omissions excepted. Please note that any views or opinions
presented in this email are solely those of the author and do not
necessarily represent those of Lumison and nPlusOne.
Finally, the recipient should check this email and any attachments for the
presence of viruses. Lumison and nPlusOne accept no liability for any
damage caused by any virus transmitted by this email.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090518/a6ed44d5/attachment.html>