[cisco-voip] MCS7825-H3 NIC1 is Dead.

Richard Humphries Richardh at aos5.com
Wed May 20 10:28:15 EDT 2009


I had two 7825's that out of the box NIC 1 was dead, so I was unable to install CER7.  Cisco sent me two new servers and I have the same problem with them as well.

Has anyone else experienced an issue like this before?  I'm awaiting on a response from TAC...wondering if there's a BIOS issue or possibly a Jumper missing, or installed incorrectly on the motherboard?

Thank you,



CONFIDENTIALITY NOTICE: This electronic mail transmission (including any accompanying attachments) is intended solely for its authorized recipient(s), and may contain confidential and/or legally privileged information. If you are not an intended recipient, or responsible for delivering some or all of this transmission to an intended recipient, be aware that any review, copying, printing, distribution, use or disclosure of the contents of this message is strictly prohibited. If you have received this electronic mail message in error, please delete it from your system without copying it, and contact sender immediately by Reply e-mail, or by calling 913-307-2300, so that our address records can be corrected.

Although this e-mail and any attachments are believed to be free of any virus or other defect that might negatively affect any computer system into which it is received and opened, it is the responsibility of the recipient to ensure that it is virus free and no responsibility is accepted by the sender for any loss or damage arising in any way in the event that such a virus or defect exists.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090520/d258af19/attachment.html>


More information about the cisco-voip mailing list