[cisco-voip] Best Test for New PRIs?

Miller, Steve MillerS at DicksteinShapiro.COM
Thu May 21 09:04:29 EDT 2009


What would the dialing string be?....just a specific POTS line number
connected to the FXO?....and what would that command tell me?  Thank
you! 


Steve Miller
Telecom Engineer
Dickstein Shapiro LLP
1825 Eye Street NW | Washington, DC 20006
Tel (202) 420-3370| Fax (202) 330-5607
MillerS at dicksteinshapiro.com 


-----Original Message-----
From: Oddiraju, Kiran @ London SMC [mailto:Kiran.Oddiraju at cbre.com] 
Sent: Thursday, May 21, 2009 9:00 AM
To: Miller, Steve; Paul; Erick Bergquist; ccieid1ot
Cc: cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] Best Test for New PRIs?

Try the below command from the CLI:

isdn call interface <interface-number> <dialing-string> [speed 56 | 64]

Rgds,
K

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Miller, Steve
Sent: 20 May 2009 15:09
To: Paul; Erick Bergquist; ccieid1ot
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Best Test for New PRIs?

Thanks.  We will have a 3825 router in place and hope to test on "turn
up" day.  We will also have POTS lines available to us that we can use
for the FXO ports. 


Steve Miller
Telecom Engineer
Dickstein Shapiro LLP
1825 Eye Street NW | Washington, DC 20006
Tel (202) 420-3370| Fax (202) 330-5607
MillerS at dicksteinshapiro.com 


-----Original Message-----
From: Paul [mailto:asobihoudai at yahoo.com] 
Sent: Wednesday, May 20, 2009 9:58 AM
To: Miller, Steve; Erick Bergquist; ccieid1ot
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Best Test for New PRIs?


Testing through FXO ports could mean a number of different things...if
you want to test calling your PRI circuits through your FXO ports, that
might work...

It sounds like these PRI circuits are at another facility where you
don't have ready access to setup a router and switch to them yet. Also
PRI circuits aren't usually hot unless you ask TelCo to make them so.
Your best test method will be with a console connection to the
PRI-connected router on your lap, and a phone jammed betwixt your
shoulder and head connected to TelCo requesting them to make the circuit
hot for you to make test calls to your mobile phone or any other test
handset you have available.


----- Original Message ----
From: "Miller, Steve" <MillerS at DicksteinShapiro.COM>
To: Erick Bergquist <erickbee at gmail.com>; ccieid1ot
<ccieid1ot at gmail.com>
Cc: cisco-voip at puck.nether.net
Sent: Wednesday, May 20, 2009 8:55:40 AM
Subject: Re: [cisco-voip] Best Test for New PRIs?

Thanks for the suggestion.  We won't have any connectivity between
offices. 

Will testing through FXO ports tell us anything about how the circuits
will work with Call Manager? 


Steve Miller
Telecom Engineer
Dickstein Shapiro LLP
1825 Eye Street NW | Washington, DC 20006
Tel (202) 420-3370| Fax (202) 330-5607
MillerS at dicksteinshapiro.com 


-----Original Message-----
From: Erick Bergquist [mailto:erickbee at gmail.com] 
Sent: Tuesday, May 19, 2009 11:46 PM
To: ccieid1ot
Cc: Miller, Steve; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Best Test for New PRIs?

Does this gateway have network connectivity to the existing call
manager?  You could set it up in the CUCM before moving the servers
and test calls in/out that way. Set up the gateway and a test
partition, route patterns, CSSs and assign the test CSS to 1 or 2
phones.

If not, do like others have suggested previously in the discussion. If
you have a FXS port on the gateway you could test with a POTS phone
off the FXS port and dial peers.

On Tue, May 19, 2009 at 9:55 PM, ccieid1ot <ccieid1ot at gmail.com> wrote:
> Make yourself a T1 loopback plug if you don't have 2 VWIC cards.
>
> Wires for Crossover T1, 1-4 2-5.
>
> On Tue, May 19, 2009 at 2:58 PM, Miller, Steve
> <MillerS at dicksteinshapiro.com> wrote:
>> We will install a couple PRIs in a new office soon. We will be
>> moving/installing an existing CUCM 7.X system which currently exists
at
>> another location (production), but it will already be move weekend
when the
>> new equipment arrives and I want to be sure that the PRIs are working
and
>> that the PRIs have been properly programmed for CUCM.
>>
>> Does anyone have details or testing plan for testing the PRIs before
the
>> CUCM is installed?
>>
>> Is there any way to actually make calls with a 3825 router by hooking
other
>> equipment to it?
>>
>> Is there a test set which would somehow emulate the system and allow
us to
>> dial out and also receive calls on the circuit?
>>
>> Any ideas would be greatly appreciated!
>>
>>
>> Steve Miller
>> Telecom Engineer
>> Dickstein Shapiro LLP
>> 1825 Eye Street NW | Washington, DC 20006
>> Tel (202) 420-3370| Fax (202) 330-5607
>> MillerS at dicksteinshapiro.com
>>
>>
>>
>> --------------------------------------------------------
>> This e-mail message and any attached files are confidential and are
intended
>> solely for the use of the addressee(s)
>> named above. This communication may contain material protected by
>> attorney-client, work product, or other
>> privileges. If you are not the intended recipient or person
responsible for
>> delivering this confidential
>> communication to the intended recipient, you have received this
>> communication in error, and any review, use,
>> dissemination, forwarding, printing, copying, or other distribution
of this
>> e-mail message and any attached files
>> is strictly prohibited. Dickstein Shapiro reserves the right to
monitor any
>> communication that is created,
>> received, or sent on its network.  If you have received this
confidential
>> communication in error, please notify the
>> sender immediately by reply e-mail message and permanently delete the
>> original message.
>> To reply to our email administrator directly, send an email to
>> postmaster at dicksteinshapiro.com
>> Dickstein Shapiro LLP
>> http://www.DicksteinShapiro.com
>>
========================================================================
======
>>
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>


--------------------------------------------------------
This e-mail message and any attached files are confidential and are
intended solely for the use of the addressee(s)
named above. This communication may contain material protected by
attorney-client, work product, or other 
privileges. If you are not the intended recipient or person responsible
for delivering this confidential
communication to the intended recipient, you have received this
communication in error, and any review, use, 
dissemination, forwarding, printing, copying, or other distribution of
this e-mail message and any attached files 
is strictly prohibited. Dickstein Shapiro reserves the right to monitor
any communication that is created, 
received, or sent on its network.  If you have received this
confidential communication in error, please notify the 
sender immediately by reply e-mail message and permanently delete the
original message. 

To reply to our email administrator directly, send an email to
postmaster at dicksteinshapiro.com

Dickstein Shapiro LLP
http://www.DicksteinShapiro.com

========================================================================
======

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip



      



--------------------------------------------------------
This e-mail message and any attached files are confidential and are
intended solely for the use of the addressee(s)
named above. This communication may contain material protected by
attorney-client, work product, or other 
privileges. If you are not the intended recipient or person responsible
for delivering this confidential
communication to the intended recipient, you have received this
communication in error, and any review, use, 
dissemination, forwarding, printing, copying, or other distribution of
this e-mail message and any attached files 
is strictly prohibited. Dickstein Shapiro reserves the right to monitor
any communication that is created, 
received, or sent on its network.  If you have received this
confidential communication in error, please notify the 
sender immediately by reply e-mail message and permanently delete the
original message. 

To reply to our email administrator directly, send an email to
postmaster at dicksteinshapiro.com

Dickstein Shapiro LLP
http://www.DicksteinShapiro.com

========================================================================
======

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
CB Richard Ellis Limited, Registered Office: St Martin's Court, 
10 Paternoster Row, London, EC4M 7HP, registered in England and Wales
No. 3536032. 
Regulated by the RICS and an appointed representative of CB Richard
Ellis 
Indirect Investment Services Limited which is authorised and regulated
by the Financial Services Authority.

This communication is from CB Richard Ellis Limited or one of its 
associated/subsidiary companies. This communication contains information

which is confidential and may be privileged. If you are not the intended
recipient, 
please contact the sender immediately. Any use of its contents is
strictly prohibited 
and you must not copy, send or disclose it, or rely on its contents in
any way whatsoever. 
Reasonable care has been taken to ensure that this communication 
(and any attachments or hyperlinks contained within it) is free from
computer viruses. 
No responsibility is accepted by CB Richard Ellis Limited or its
associated/subsidiary 
companies and the recipient should carry out any appropriate virus
checks.




--------------------------------------------------------
This e-mail message and any attached files are confidential and are intended solely for the use of the addressee(s)
named above. This communication may contain material protected by attorney-client, work product, or other 
privileges. If you are not the intended recipient or person responsible for delivering this confidential
communication to the intended recipient, you have received this communication in error, and any review, use, 
dissemination, forwarding, printing, copying, or other distribution of this e-mail message and any attached files 
is strictly prohibited. Dickstein Shapiro reserves the right to monitor any communication that is created, 
received, or sent on its network.  If you have received this confidential communication in error, please notify the 
sender immediately by reply e-mail message and permanently delete the original message. 

To reply to our email administrator directly, send an email to postmaster at dicksteinshapiro.com

Dickstein Shapiro LLP
http://www.DicksteinShapiro.com

==============================================================================



More information about the cisco-voip mailing list