[cisco-voip] IP Phone SSH

[Wes Sisk]

you have to reset the phone after making that config change.  Phone has 
to successfully TFTP config file from CM.  Most likely your phone is not 
successfully completing TFTP.

/Wes

On Wednesday, May 27, 2009 1:02:25 PM, Tanner Ezell 
<tanner.ezell at gmail.com> wrote:
> Hey all
>
> I'm playing around with one of our IP phones attempting to ssh into 
> it, however the username/password I setup on the device configuration 
> doesn't seem to have any effect. Am I missing something?
>
> I checked related threads, there was one but it did not go over how to 
> actually do it.
> ------------------------------------------------------------------------
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>   

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090527/4b9ab64b/attachment.html>