[cisco-voip] Difference b/w VWIC2-1MFT-T1/E1 & VWIC2-1MFT-G703

[Peter Slow]

g.703 specifies an unframed E1 - Meaning that there is no framing, and
therefore are no timeslots. a 703 E1 is going to get used for data, a
g.703 unstructured E1 cannot provide  voice service.

According to http://www.cisco.com/en/US/docs/ios/12_2/12_2z/12_2zj/feature/guide/gthwecan.html
the 703 VWIC2 shoudl also support structured mode, whichs is what will
let you specify timeslots.
"2 Although unstructured G.703 operation is particular to E1
operation, the VWIC2-1/2MFT-G703 cards also support structured T1
operation. "

Hope this helps,
 Peter

On Wed, May 27, 2009 at 10:57 AM, Syed Khalid Ali
<syed.khalid.khursheed at gmail.com> wrote:
> Any thing else that I should be considering when ordering???
>
> On Wed, May 27, 2009 at 5:31 PM, ccieid1ot <ccieid1ot at gmail.com> wrote:
>> VWIC2-1MFT-T1/E1 & VWIC2-1MFT-G703 <----Support only E1
>>
>> On Wed, May 27, 2009 at 5:44 AM, Syed Khalid Ali
>> <syed.khalid.khursheed at gmail.com> wrote:
>>> Dear all,
>>> Can any one clarify the difference between these card? I am totally confused!!!
>>>
>>> --
>>> Thanks,
>>> Syed Khalid Ali
>>> _______________________________________________
>>> cisco-voip mailing list
>>> cisco-voip at puck.nether.net
>>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>>
>>
>
>
>
> --
> Thanks,
> Syed Khalid Ali
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>