[cisco-voip] Ring setting

[Wes Sisk]

The system administrator must enable the option via enterprise 
parameters. Then the per-line ring settings appear in the CCMUser pages 
allowing the user to select behavior per line.

Ring Settings
Ring Setting (Phone Idle) Required Field   
Ring Setting (Phone Active)   

/Wes

On Wednesday, May 27, 2009 3:45:43 PM, Lisa Notarianni 
<notariannil1 at scranton.edu> wrote:
> Is there anyway to turn a ringer on and off from the phone for 
> different lines.  we have departments that need to hear the ring only 
> when covering for another department from time to time.  They do not 
> want the lines to ring all the time.  They want the lines to appear on 
> their phones.  They do not want the lines call forwarded to make this 
> work.
>
> Thanks...Lisa
> -- 
> ------------------------------------------------------------------------
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>   

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090528/81f3cb7f/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/gif
Size: 11474 bytes
Desc: not available
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090528/81f3cb7f/attachment.gif>