[cisco-voip] Second Node in Cluster[Scanned]

[Martin Bufton]

I have set the Firewalls to allow all traffic to pass between the
Callmanagers.

 

I have thought about connecting the SUB to the same switch but on a
separate VLAN, means I won't have to change the IP addresses, also
nothing is interfering. 

 

My PUB is 172.16.74.10

My Sub is 172.16.10.10

 

 

My worry is if it does work, when connected to the same switch, and then
I try connecting back to where it should be located what if it then
doesn't work

 

 

Martin Bufton BSc (Hons), CCNA - Systems Engineer

 

 

From: Ryan Ratliff [mailto:rratliff at cisco.com] 
Sent: 03 November 2009 15:58
To: Martin Bufton
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Second Node in Cluster[Scanned]

 

The error you are getting is clustermanager on the new sub trying to
communicate with the same service on the publisher.  This is necessary
so that the publisher will open up the iptables firewall to allow the
sub to communicate for the installation.  This is done via UDP port 8500
and the certificate exchange is typically large packets that will get
fragmented/segmented.

 

If you move the server so it's not over the VPN from the pub will the
install proceed?  

Are you blocking any traffic over the vpn?

 

-Ryan

 

On Nov 3, 2009, at 10:27 AM, Martin Bufton wrote:





I'm tryin to add a second Node to my CCM 7 environment.

 

I have added the second server via the web interface setting the IP
address and description.

 

I have even restarted the 1st server

 

When I try and add the second server I get the following error

"could not contact server using UDP 8500"

 

Or words to similar effect.

 

My MTU is set to 1400 on bother servers, so should be allowed across my
VPN, I can ping ok and also got past the stage of confirming security
password so connectivity should be good.

 

Other forums suggested a possible DNS issue so I have removed all
reference to DNS on both server.

 

and still it's not working.

 

Can anyone point me in the best direction to continue troubleshooting?

 

Thanks in advance

 

Martin

 

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091103/fe6cfc6d/attachment.html>