[cisco-voip] Unity Connection Problem

Lelio Fulgenzi lelio at uoguelph.ca
Thu Nov 5 09:05:06 EST 2009


It's likely the busy greeting is set to blank. 

--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
"Bad grammar makes me [sic]" - Tshirt 


----- Original Message ----- 
From: "Lisa Notarianni" <notariannil1 at scranton.edu> 
Cc: cisco-voip at puck.nether.net 
Sent: Thursday, November 5, 2009 8:56:20 AM GMT -05:00 US/Canada Eastern 
Subject: [cisco-voip] Unity Connection Problem 

We are running Cisco Unity Connection version: 7.1.2.20000-140. 

If I call x6205 directly it goes to the voice mailbox as it should. 

However, x6204 after busy or no answer is set in Call Manager to go to x6205. 
This happens correctly, but it goes directly to beep without hearing the greeting. 

There must be a setting to say if x6204 bounces to x6205 it should go directly to beep if no one answers. I cannot find it anywhere. 

Any ideas? 


-- 

_______________________________________________ cisco-voip mailing list cisco-voip at puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip 
_______________________________________________ cisco-voip mailing list cisco-voip at puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091105/150abbd2/attachment.html>


More information about the cisco-voip mailing list