[cisco-voip] 7.1(3) and MCS-7825-H4-IPC1 doesn't install

[Ryan Ratliff]

What is the processor speed and memory total the bios reports?

Is the SATA raid enabled?

That server is new but should be supported with 6.1(3), 7.1(2), and 7.1 
(3).  Do you happen to have one of the other versions to test with?

-Ryan

On Nov 5, 2009, at 2:15 PM, Jason Aarons (US) wrote:

Stuck DVD in getting Critical Error – HW Type Not Supported

Halted

New MCS-7825-H4-IPC1


Disclaimer: This e-mail communication and any attachments may contain  
confidential and privileged information and is for use by the  
designated addressee(s) named above only. If you are not the intended  
addressee, you are hereby notified that you have received this  
communication in error and that any use or reproduction of this email  
or its contents is strictly prohibited and may be unlawful. If you  
have received this communication in error, please notify us  
immediately by replying to this message and deleting it from your  
computer. Thank you.

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091105/cff07265/attachment.html>