[cisco-voip] CM 7.1 Remoet Destination

[Tim Frazee]

You can't just add both profiles (user1 and president) to each remote
destination? the same setup you would use if you wanted to ring 2 remote
devices at the same time with the ip phone.

On Sun, Nov 8, 2009 at 5:09 PM, Jason Aarons (US) <
jason.aarons at us.didata.com> wrote:

>  I created a Remote Destination (Device > Remote Destination) for Mobile
> Connect.  I made it a cell phone of the area manager.
>
>
>
> Now I have two users that have Remote Destination Profiles, both want the
> president’s Remote Destination cell phone in their profile. I don’t see a
> way to do that.
>
>
>
> If you dial either users DID they should both ring the their phone and the
> managers phone.**
>
> * *
>
>
>
>
>
> ------------------------------
>
> * Disclaimer: This e-mail communication and any attachments may contain
> confidential and privileged information and is for use by the designated
> addressee(s) named above only. If you are not the intended addressee, you
> are hereby notified that you have received this communication in error and
> that any use or reproduction of this email or its contents is strictly
> prohibited and may be unlawful. If you have received this communication in
> error, please notify us immediately by replying to this message and deleting
> it from your computer. Thank you. *
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091108/75a9ecc1/attachment.html>