[cisco-voip] CM Upgrade from 6.1(2) to 7.0(2a)

Mon Nov 9 16:08:04 EST 2009

Thanks John - I had seen that as well however I'm running the H3 models
of the 7825.

Regards,

Neil O'Brien

Network Engineer

Datapac Ltd

Phone: +353 1 426 3500

Fax:    +353 1 426 3501

Email:  nobrien at datapac.com <x-msg://375/nobrien@datapac.com> 

Web:   www.datapac.com <x-msg://375/www.datapac.com> 

Datapac is the leading Irish business technologies provider

IT Maintenance & Managed Services | Virtualisation & Storage Solutions |
Microsoft Infrastructure Solutions 

Voice & Data Networks | Unified Communications | Microsoft Dynamics Nav
ERP | EPOS Retail Solutions | IT Consumables

From: Robben, John [mailto:JRobben at naic.org] 
Sent: 09 November 2009 21:01
To: O'Brien, Neil
Subject: RE: [cisco-voip] CM Upgrade from 6.1(2) to 7.0(2a)

Neil,

My apologies.  I see now that the media from PUT is required for the
path you are seeking to travel (6.x to 7.x).

I found something similar to what is happening to you referenced in bug
CSCta43460.

Not trying to load on an MCS 7825-I2 by any chance are you?

Regards,

John

________________________________

From: O'Brien, Neil [mailto:nobrien at datapac.com] 
Sent: Monday, November 09, 2009 2:46 PM
To: Ryan Ratliff
Cc: Scott Voll; Lelio Fulgenzi; cisco-voip at puck.nether.net; Robben, John
Subject: RE: [cisco-voip] CM Upgrade from 6.1(2) to 7.0(2a)

Hi Ryan,

See below, these are the logs from the last few seconds of the install..
I'm not sure at which point it fails though but maybe you can decipher
this better than I can!

I wonder do I need some sort of ES for my particular version, maybe I'll
TAC it in the morning.

Thanks,

Neil

11/09/2009 16:51:54 CCMInstall|(CAPTURE) logoutDevices - Resume the
login device configuration src
DSN=ccm_b;Servername=rh_ccm01_ccm6_1_2_1000_13 dst
DSN=ccm_super;Servername=rh_ccm01_ccm7_0_2_20000_5|<LVL::Debug>

11/09/2009 16:51:54 CCMInstall|(CAPTURE) This step could take a long
time if there are a lot of devices that have user currently
login.|<LVL::Debug>

11/09/2009 16:51:54 CCMInstall|(CAPTURE) logoutDevices
rc[0]|<LVL::Debug>

11/09/2009 16:51:54 CCMInstall|(CAPTURE) fixDDIClauses
rc[0]|<LVL::Debug>

11/09/2009 16:51:54 CCMInstall|(CAPTURE) Update Statistics
DSN=ccm_super;Servername=rh_ccm01_ccm7_0_2_20000_5|<LVL::Debug>

11/09/2009 16:51:54 CCMInstall|(CAPTURE) updateStatistics
rc[0]|<LVL::Debug>

11/09/2009 16:51:54 CCMInstall|(CAPTURE) enablenotify
dsn[DSN=ccm_super;Servername=rh_ccm01_ccm7_0_2_20000_5]|<LVL::Debug>

11/09/2009 16:51:54 CCMInstall|(CAPTURE) enablenotify
rc[0]|<LVL::Debug>

11/09/2009 16:51:54 CCMInstall|(CAPTURE) installFull  rc[1]|<LVL::Debug>

11/09/2009 16:51:54 CCMInstall|(CAPTURE) installdb Failure [-i]
1|<LVL::Debug>

11/09/2009 16:51:54 CCMInstall|(CAPTURE) shared memory not initialized
for INFORMIXSERVER 'rh_ccm01_ccm7_0_2_20000_5'|<LVL::Debug>

11/09/2009 16:51:54 CCMInstall|(CAPTURE) 16:51:46  Loading Module
</usr/local/platform/lib/liblicreq.so>|<LVL::Debug>

11/09/2009 16:51:54 CCMInstall|(CAPTURE) 16:51:46  The C Language Module
</usr/local/platform/lib/liblicreq.so> can't load|<LVL::Debug>

11/09/2009 16:51:54 CCMInstall|(CAPTURE)     reason: libxerces-c.so.27:
cannot open shared object file: No such file or directory|<LVL::Debug>

11/09/2009 16:51:54 CCMInstall|(CAPTURE) 16:51:46  (-1): ERROR: Loading
Module </usr/local/platform/lib/liblicreq.so>|<LVL::Debug>

11/09/2009 16:51:54 CCMInstall|(CAPTURE) 16:51:53  Checkpoint Completed:
duration was 2 seconds.|<LVL::Debug>

11/09/2009 16:51:54 CCMInstall|(CAPTURE) 16:51:53  Checkpoint loguniq
10, logpos 0x31da018, timestamp: 0x13634e|<LVL::Debug>

11/09/2009 16:51:54 CCMInstall|(CAPTURE) |<LVL::Debug>

11/09/2009 16:51:54 CCMInstall|(CAPTURE) 16:51:53  Maximum server
connections 11 |<LVL::Debug>

11/09/2009 16:51:54 CCMInstall|(CAPTURE) 16:51:54  IBM Informix Dynamic
Server Stopped.|<LVL::Debug>

11/09/2009 16:51:54 CCMInstall|(CAPTURE) |<LVL::Debug>

11/09/2009 16:51:54 CCMInstall|(CAPTURE) su -c 'if [ -f
/usr/local/cm/db/informix/local/ids.env ]; then source
/usr/local/cm/db/informix/local/ids.env l2; fi ; onmode -yck' -
informix|<LVL::Debug>

11/09/2009 16:51:54 CCMInstall|(CAPTURE) source
/usr/local/cm/db/informix/local/ids.env  l2 ; onstat -|<LVL::Debug>

11/09/2009 16:51:54 CCMInstall|(CAPTURE) Mon Nov  9 16:51:54 2009
cm-dbl-install.installdb  DEBUG:  <--|<LVL::Debug>

11/09/2009 16:51:54 CCMInstall|(CAPTURE) Mon Nov  9 16:51:54 2009
cm-dbl-install.doL2_migrateDB  DEBUG:  <--|<LVL::Debug>

11/09/2009 16:51:54 CCMInstall|(CAPTURE) Mon Nov  9 16:51:54 2009
cm-dbl-install.doL2Post  DEBUG:  <--|<LVL::Debug>

11/09/2009 16:51:54 CCMInstall|(CAPTURE) Mon Nov  9 16:51:54 2009
cm-dbl-install.doActionL2Update  DEBUG:  <--|<LVL::Debug>

11/09/2009 16:51:54 CCMInstall|(CAPTURE) Mon Nov  9 16:51:54 2009
cm-dbl-install  DEBUG:  cm-dbl-install [1]|<LVL::Debug>

11/09/2009 16:51:54 CCMInstall|(CAPTURE) Mon Nov  9 16:51:54 2009
cm-dbl-install  DEBUG:  <--|<LVL::Debug>

11/09/2009 16:51:54 CCMInstall|Internal Error, File:instMain.c:1430,
Function: handlePhase(), Failed to exec command:
"/partB/usr/local/bin/base_scripts/env.sh nice -n 19 /usr/sbin/chroot
/partB /usr/local/cm/script/7.0.2.20000-5/cm-dbl-install L2 PostInstall
7.0.2.20000-5 6.1.2.1000-13 /usr/local/cm/ /partB/usr/local/cm/
/common/log/install/capture.txt"|<LVL::Critical>

11/09/2009 16:51:55 appmanager.sh|CCMInstall --upgrade
ERROR|<LVL::Error>

11/09/2009 16:51:55 upgrade_manager.sh|Applications upgrade
failed|<LVL::Error>

11/09/2009 16:51:55 upgrade_install.sh|Cleaning up
download...|<LVL::Info>

11/09/2009 16:51:55 upgrade_install.sh|Removing
/common/download/7.0.2.20000-5|<LVL::Info>

11/09/2009 16:51:55 upgrade_install.sh|Cleaning up
rpm_archive...|<LVL::Info>

11/09/2009 16:51:55 upgrade_install.sh|Removing
/common/rpm-archive/7.0.2.20000-5|<LVL::Info>

11/09/2009 16:52:00 upgrade_install.sh|CSA Status = 0|<LVL::Debug>

11/09/2009 16:52:00 upgrade_install.sh|/etc/init.d/ciscosec
start|<LVL::Info>

Regards,

Neil O'Brien

Network Engineer

Datapac Ltd

Phone: +353 1 426 3500

Fax:    +353 1 426 3501

Email:  nobrien at datapac.com <x-msg://375/nobrien@datapac.com> 

Web:   www.datapac.com <x-msg://375/www.datapac.com> 

Datapac is the leading Irish business technologies provider

IT Maintenance & Managed Services | Virtualisation & Storage Solutions |
Microsoft Infrastructure Solutions 

Voice & Data Networks | Unified Communications | Microsoft Dynamics Nav
ERP | EPOS Retail Solutions | IT Consumables

From: Ryan Ratliff [mailto:rratliff at cisco.com] 
Sent: 09 November 2009 19:50
To: O'Brien, Neil
Cc: Scott Voll; Lelio Fulgenzi; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] CM Upgrade from 6.1(2) to 7.0(2a)

License is for after the upgrade.

Can you pull any of the install logs from the active and inactive
partitions? There should be a more specific failure cause in there.

-Ryan

On Nov 9, 2009, at 2:20 PM, O'Brien, Neil wrote:

Actually - I wonder if it has anything to do with the upgrade license
file??  Do you apply the license before or after the upgade.  I have the
upgrade license but I'm waiting for temp upgrade licenses because it's a
lab scenario.

Regards,

Neil O'Brien

Network Engineer

Datapac Ltd

Phone: +353 1 426 3500

Fax:    +353 1 426 3501

Email:  nobrien at datapac.com <x-msg://375/nobrien@datapac.com> 

Web:   www.datapac.com <x-msg://375/www.datapac.com> 

Datapac is the leading Irish business technologies provider

IT Maintenance & Managed Services | Virtualisation & Storage Solutions |
Microsoft Infrastructure Solutions

Voice & Data Networks | Unified Communications | Microsoft Dynamics Nav
ERP | EPOS Retail Solutions | IT Consumables

From: O'Brien, Neil 
Sent: 09 November 2009 19:18
To: 'Scott Voll'; Lelio Fulgenzi
Cc: cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] CM Upgrade from 6.1(2) to 7.0(2a)

Thanks Guys, but I have the genuine DVD media from Cisco.  It didn't
work directly from the DVD so I created the upgrade ISO from the DVD.  I
don't know if creating the ISO is the right way but the DVD media should
work?

I didn't check the MD5 hash but I suspect it will be ok.

Regards,

Neil O'Brien

Network Engineer

Datapac Ltd

Phone: +353 1 426 3500

Fax:    +353 1 426 3501

Email:  nobrien at datapac.com <x-msg://375/nobrien@datapac.com> 

Web:   www.datapac.com <x-msg://375/www.datapac.com> 

Datapac is the leading Irish business technologies provider

IT Maintenance & Managed Services | Virtualisation & Storage Solutions |
Microsoft Infrastructure Solutions

Voice & Data Networks | Unified Communications | Microsoft Dynamics Nav
ERP | EPOS Retail Solutions | IT Consumables

From: Scott Voll [mailto:svoll.voip at gmail.com] 
Sent: 09 November 2009 17:40
To: Lelio Fulgenzi
Cc: O'Brien, Neil; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] CM Upgrade from 6.1(2) to 7.0(2a)

have you also checked the MD5 hash to make sure it's a correct ISO file?

Scott

On Mon, Nov 9, 2009 at 9:30 AM, Lelio Fulgenzi <lelio at uoguelph.ca>
wrote:

did you create a DVD from the ISO or did you create a DVD with the ISO
file on it?

you want to create a DVD with the ISO file on it as an accessible file
as far as I know.

---
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
"Bad grammar makes me [sic]" - Tshirt

----- Original Message -----
From: "Neil O'Brien" <nobrien at datapac.com>
To: cisco-voip at puck.nether.net
Sent: Monday, November 9, 2009 12:06:26 PM GMT -05:00 US/Canada Eastern
Subject: [cisco-voip] CM Upgrade from 6.1(2) to 7.0(2a)

Hey,

I haven't logged a TAC case for this yet as I thought I might be doing
something silly.

I'm upgrading Call manager from 6.1(2) to 7.0(2a) in a lab environment
prior to carrying it out on our production environment.

I tried running the upgrade via the DVD and about 45 mins into the
installation I get "Error encountered: An unknown error occurred while
accessing the upgrade file."

So I thought it might be the DVD so I created an ISO of the DVD on my
laptop and ran the upgrade via FTP which results in the same error.

Am I missing something??

Not a lot of info I know, but I can attach the install log if required?

Thanks in advance,

Neil

Regards,

Neil O'Brien

Network Engineer

Datapac Ltd

Phone: +353 1 426 3500

Fax:    +353 1 426 3501

Email:  nobrien at datapac.com

Web:   www.datapac.com

Datapac is the leading Irish business technologies provider

IT Maintenance & Managed Services | Virtualisation & Storage Solutions |
Microsoft Infrastructure Solutions

Voice & Data Networks | Unified Communications | Microsoft Dynamics Nav
ERP | EPOS Retail Solutions | IT Consumables

_______________________________________________ cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

________________________________

CONFIDENTIALITY NOTICE This message and any attachments are from the
NAIC and are intended only for the addressee. Information contained
herein is confidential, and may be privileged or exempt from disclosure
pursuant to applicable federal or state law. This message is not
intended as a waiver of the confidential, privileged or exempted status
of the information transmitted. Unauthorized forwarding, printing,
copying, distribution or use of such information is strictly prohibited
and may be unlawful. If you are not the addressee, please promptly
delete this message and notify the sender of the delivery error by
e-mail or by calling the NAIC Help Desk at (816)783-8500. 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091109/c28181df/attachment.html>