[cisco-voip] VG224 + SCCP + MoH

[Jonathan Charles]

OK, if it is MOH Intercept, we need to see the config.


Jonathan

On Mon, Nov 16, 2009 at 9:43 AM, Glen Cobby <glen at positivenetworks.co.uk> wrote:
> Hi Jonathan,
>
> The Music on hold is sent via Multicast from the local voice gateway using flash to 239.1.1.1 the ip phones all work ok, however as mentioned the fxs ports gets tone on hold. If they were in different device pools and regions I would understand.
>
> Just wondering if the VG224 supports MoH.
>
> Thanks
>
> Glen
>
>
> On 16 Nov 2009, at 14:48, Jonathan Charles wrote:
>
>> What MoH source does theVG224 have? Is there a CDC on it?
>>
>>
>> J
>>
>> On Mon, Nov 16, 2009 at 5:23 AM, Glen Cobby <glen at positivenetworks.co.uk> wrote:
>>> Hi All,
>>>
>>> I have a VG224 which is configured for SCCP and have a couple of analogue phones connected. When an analogue phone calls an IP phone and the IP phone puts the analogue phone on hold we receive tone on hold rather than Music on Hold.
>>>
>>> All devices are in the same Device Pool and Region and the MoH is sent as a multicast stream, if the VG224 was trying to listen to the Music on Hold and the multicast stream was not reaching the device I would expect silence. As I am getting tones it is as if the CCM is telling the device to play tone rather than the MoH stream.
>>>
>>> Has anyone had MoH working to a VG224 analogue phone?
>>>
>>> CCM Version - 6.1.3
>>> VG224 Version - 12.4(15)T10
>>>
>>> Thanks for any help.
>>>
>>> Glen
>>> _______________________________________________
>>> cisco-voip mailing list
>>> cisco-voip at puck.nether.net
>>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>>
>
>