[cisco-voip] CUMA Lab vmware install

[Dane Newman]

It oddly always stops at 2 of 45 scripts and 26% done

Dane

On Mon, Nov 16, 2009 at 4:12 PM, Dane Newman <dane.newman at gmail.com> wrote:

> I reconfigured it to be RHEL 4 32 bit and 80 gig IDE hard drive inside
> vmware and it's still freezing on the install....hmm
>
> has anyone been able to sucessfully install it on esxi?
>
> Dane
>
>   On Mon, Nov 16, 2009 at 1:45 PM, Ryan Ratliff <rratliff at cisco.com>wrote:
>
>> All of the 7.x UC apps I'm aware of are RHEL 4.  I don't know if that's
>> causing your issue but give it a shot.
>>
>> -Ryan
>>
>> On Nov 16, 2009, at 1:18 PM, Dane Newman wrote:
>>
>> Hello Folks
>>
>> I am trying to install Cisco unified mobility advantage into esxi vmware
>> test purposes.  I heard cuma can be installed into vmware but I am running
>> into an issue where the install always freezes and eventually times out.
>>  Inside my vmware esxi box I created a virtual machine with 2 gigs of ram 2
>> cpus and 80 gig hard drive based on Red hat 3.  The cuma disk version is
>> 7.0.1.1  It always freezes at the end of the install WHen the title says
>> Post Application Install on running initilization scripts 2 of 45.  Does
>> anyone have any advice or help to get it installed?
>>  _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091116/f95fd958/attachment.html>