[cisco-voip] UCM 7.1(3) vs. 7.1(3a)

[Lelio Fulgenzi]

okidoke. thanks. i had a feeling, since there was no ES in the notes. 

--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
"Bad grammar makes me [sic]" - Tshirt 


----- Original Message ----- 
From: "Ryan Ratliff" <rratliff at cisco.com> 
To: "Lelio Fulgenzi" <lelio at uoguelph.ca> 
Cc: cisco-voip at puck.nether.net, "Bill Carter" <bcarter at sentinel.com> 
Sent: Monday, November 16, 2009 5:18:09 PM GMT -05:00 US/Canada Eastern 
Subject: Re: [cisco-voip] UCM 7.1(3) vs. 7.1(3a) 

I think we've gathered that CUCM and UC ES' are the same, so since 7.1(3) has the same base ES 7.1(3a) I would assume UC ES5 is not included. I believe UC 7.1.3ES5 went into CUCM 7.1.3.11001-7. 




-Ryan 


On Nov 16, 2009, at 3:04 PM, Lelio Fulgenzi wrote: 


Ryan, 

I checked the release notes for CUC 7.1(3)a and it doesn't say what ES is the base for this. 

We're about to test Connection 7.1(3)ES5 and would rather go with a public version if it contains this ES as the base. 



--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
"Bad grammar makes me [sic]" - Tshirt 


----- Original Message ----- 
From: "Ryan Ratliff" < rratliff at cisco.com > 
To: "Bill Carter" < bcarter at sentinel.com > 
Cc: cisco-voip at puck.nether.net 
Sent: Monday, November 16, 2009 10:34:03 AM GMT -05:00 US/Canada Eastern 
Subject: Re: [cisco-voip] UCM 7.1(3) vs. 7.1(3a) 

That's all I can see. Both are based on the same ES so I don't think anything else "snuck in" to 7.1(3a). 



-Ryan 


On Nov 16, 2009, at 9:57 AM, Carter, Bill wrote: 



What was changed between 7.1(3) and 7.1(3a)? 


CSCtc81478 Wrong Timezone Displays After an Upgrade to Unified CM 7.1(3) from 5.1(3) 

After an upgrade from Unified CM 5.1(3) directly to 7.1(3), third generation phones displayed GMT time. 

The release of Cisco Unified Communications Manager 7.1(3a) resolves that problem. 

This is the change I can find. 

_______________________________________________ 
cisco-voip mailing list 
cisco-voip at puck.nether.net 
https://puck.nether.net/mailman/listinfo/cisco-voip 


_______________________________________________ cisco-voip mailing list cisco-voip at puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091116/045ddf1c/attachment.html>