[cisco-voip] Voice Router - PRI Card Compatibility

Kim, Hyoun S Hyoun.Kim at chartercom.com
Mon Nov 16 18:12:56 EST 2009


Actually, thanks for making me double check.  There are only 16-channels
enabled on the PRI going to the Avaya.  Punching that into the DPS
calculator gave me this:  

Optimized Result(Default)

1 DSP(s). 
one PVDM2-16 

CLI Info <javascript:show_result(1)> 

Normal Result

2 DSP(s). 
one PVDM2-32 

or 

two PVDM2-16 

	

 

I guess I'm "ok" with the optimized result.  I notice the normal result
mentions more DSPs.  With the suggestion it made, shouldn't optimized be
the one with 2 DSPs?

 

Hyoun Kim

Network Administrator I

Charter Media - East Division

640 Broadmor Blvd, Suite 80

Murfreesboro, TN 37129

 

Email: Hyoun.Kim at chartercom.com

Office: 615.217.6245

Fax: 615.217.6255

 

From: Dennis Heim [mailto:Dennis.Heim at cdw.com] 
Sent: Monday, November 16, 2009 5:09 PM
To: Kim, Hyoun S; Norton, Mike; cisco-voip at puck.nether.net
Subject: RE: Voice Router - PRI Card Compatibility

 

How many channels on that PRI are you going to bring up or are you
looking to do a full PRI to your avaya?

 

Dennis Heim
Network Voice Engineer
CDW  Advanced Technology Services
11711 N. Meridian Street, Suite 225
Carmel, IN  46032

317.569.4255 Office
317.569.4201 Fax
317.694.6070 Cell

dennis.heim at cdw.com
www.berbee.com <http://www.berbee.com/> 

 

From: Kim, Hyoun S [mailto:Hyoun.Kim at chartercom.com] 
Sent: Monday, November 16, 2009 6:08 PM
To: Dennis Heim; Norton, Mike; cisco-voip at puck.nether.net
Subject: RE: Voice Router - PRI Card Compatibility

 

Yeah,

 

Mike just sent me the link to that.  It mentioned that the "normal
result" would be 1 DSP (PVDM2-8).  There are only 9 people in the branch
office, hence why I think the PVDM2-16 would be ok.

 

Hyoun Kim

Network Administrator I

Charter Media - East Division

640 Broadmor Blvd, Suite 80

Murfreesboro, TN 37129

 

Email: Hyoun.Kim at chartercom.com

Office: 615.217.6245

Fax: 615.217.6255

 

From: Dennis Heim [mailto:Dennis.Heim at cdw.com] 
Sent: Monday, November 16, 2009 5:06 PM
To: Kim, Hyoun S; Norton, Mike; cisco-voip at puck.nether.net
Subject: RE: Voice Router - PRI Card Compatibility

 

You can always use the dsp calculator on cco just to be safe.

 

Dennis Heim
Network Voice Engineer
CDW  Advanced Technology Services
11711 N. Meridian Street, Suite 225
Carmel, IN  46032

317.569.4255 Office
317.569.4201 Fax
317.694.6070 Cell

dennis.heim at cdw.com
www.berbee.com <http://www.berbee.com/> 

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Kim, Hyoun S
Sent: Monday, November 16, 2009 5:48 PM
To: Norton, Mike; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Voice Router - PRI Card Compatibility

 

Thanks Mike.  This is what it returns for the remote branch router:

        PVDM Slot 0:

        16-channel (G.711) Voice/Fax PVDMII DSP SIMM PVDM daughter card

 

I can verify that this is ok because our router in our office has:

        PVDM Slot 0:

        64-channel (G.711) Voice/Fax PVDMII DSP SIMM PVDM daughter card

 

So I'm set just to replace that HWIC card with a VWIC?

 

Hyoun Kim

Network Administrator I

Charter Media - East Division

640 Broadmor Blvd, Suite 80

Murfreesboro, TN 37129

 

Email: Hyoun.Kim at chartercom.com

Office: 615.217.6245

Fax: 615.217.6255

 

From: Norton, Mike [mailto:mikenorton at pwsd76.ab.ca] 
Sent: Monday, November 16, 2009 4:45 PM
To: Kim, Hyoun S; cisco-voip at puck.nether.net
Subject: RE: Voice Router - PRI Card Compatibility

 

Do "show diag" and look for what is in the PVDM slots. Or, physically
open the router and look for what is in the PVDM slots.

 

-- 

Mike Norton

I.T. Support

Peace Wapiti School Division No. 76

Helpdesk: 780-831-3080

Direct: 780-831-3076

 

From: Kim, Hyoun S [mailto:Hyoun.Kim at chartercom.com] 
Sent: November-16-09 3:42 PM
To: Norton, Mike; cisco-voip at puck.nether.net
Subject: RE: Voice Router - PRI Card Compatibility

 

ARG..  I had the feeling it was the wrong card... but wanted to verify
with other experts before I raised a hullabaloo.

 

Thanks Mike.

 

P.S. - How do I know if a DSP was included in my bundle?

 

Hyoun Kim

Network Administrator I

Charter Media - East Division

640 Broadmor Blvd, Suite 80

Murfreesboro, TN 37129

 

Email: Hyoun.Kim at chartercom.com

Office: 615.217.6245

Fax: 615.217.6255

 

From: Norton, Mike [mailto:mikenorton at pwsd76.ab.ca] 
Sent: Monday, November 16, 2009 4:41 PM
To: Kim, Hyoun S; cisco-voip at puck.nether.net
Subject: RE: Voice Router - PRI Card Compatibility

 

HWIC is for data, not voice. As for whether or not they shipped you the
wrong card, that depends on what you ordered. ;-)

 

Don't forget you will need DSP as well, unless the router was purchased
as a bundle that came with it.

 

-- 

Mike Norton

I.T. Support

Peace Wapiti School Division No. 76

Helpdesk: 780-831-3080

Direct: 780-831-3076

 

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Kim, Hyoun S
Sent: November-16-09 3:21 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Voice Router - PRI Card Compatibility

 

I'm not too keen on my VoIP terminology, so please excuse me if you get
confused... 

My company recently purchased a C2811 router for a VoIP deployment at a
branch office. Currently they are using PRI to connect to their analog
(Avaya) phone system. I am to remove their analog system entirely and
replace it with a Cisco VoIP solution. 

While I have never actually installed a Cisco VoIP system from scratch,
I have maintained the one at my current office. I have most of the
configuration finished on the router, but I cannot specify the voice
ports on the new C2811 router. The PRI that is used at the remote office
is the same type that is used in my current office.

After a couple hours of troubleshooting, I came to the realization that
the card that is currently in use at my office is a "VWIC2-2MFT-T1/E1".
The card that came with my voice router for the remote branch is a
"HWIC-1DSU-T1". Is this the reason why I cannot configure my voice
ports? Did they ship me the wrong card?

 

Thanks in advance.

 

 

 

________________________________

Hyoun Kim * Network Administrator I - East Division

640 Broadmor Blvd * Suite 80 * Murfreesboro, TN 37129

' 615.217.6245 * ' 859.312.6941 * 7 615.217.6255 * * 
Hyoun.Kim at chartercom.com

 

 
E-MAIL CONFIDENTIALITY NOTICE: 
 
 
 
 
 
 
 
The contents of this e-mail message and 
any attachments are intended solely for the 
addressee(s) and may contain confidential 
and/or legally privileged information. If you 
are not the intended recipient of this message 
or if this message has been addressed to you 
in error, please immediately alert the sender
 by reply e-mail and then delete this message 
and any attachments. If you are not the 
intended recipient, you are notified that 
any use, dissemination, distribution, copying, 
or storage of this message or any attachment 
is strictly prohibited.
 
 
 
 
 
 
 
 
E-MAIL CONFIDENTIALITY NOTICE: 
 
 
 
 
 
 
 
The contents of this e-mail message and 
any attachments are intended solely for the 
addressee(s) and may contain confidential 
and/or legally privileged information. If you 
are not the intended recipient of this message 
or if this message has been addressed to you 
in error, please immediately alert the sender
 by reply e-mail and then delete this message 
and any attachments. If you are not the 
intended recipient, you are notified that 
any use, dissemination, distribution, copying, 
or storage of this message or any attachment 
is strictly prohibited.
 
 
 
 
 
 
 
 
E-MAIL CONFIDENTIALITY NOTICE: 
 
 
 
 
 
 
 
The contents of this e-mail message and 
any attachments are intended solely for the 
addressee(s) and may contain confidential 
and/or legally privileged information. If you 
are not the intended recipient of this message 
or if this message has been addressed to you 
in error, please immediately alert the sender
 by reply e-mail and then delete this message 
and any attachments. If you are not the 
intended recipient, you are notified that 
any use, dissemination, distribution, copying, 
or storage of this message or any attachment 
is strictly prohibited.
 
 
 
 
 
 
 
 
E-MAIL CONFIDENTIALITY NOTICE: 
 
 
 
 
 
 
 
The contents of this e-mail message and 
any attachments are intended solely for the 
addressee(s) and may contain confidential 
and/or legally privileged information. If you 
are not the intended recipient of this message 
or if this message has been addressed to you 
in error, please immediately alert the sender
 by reply e-mail and then delete this message 
and any attachments. If you are not the 
intended recipient, you are notified that 
any use, dissemination, distribution, copying, 
or storage of this message or any attachment 
is strictly prohibited.
 
 
 
 
 
 
 

E-MAIL CONFIDENTIALITY NOTICE: 

 

 

 

The contents of this e-mail message and 
any attachments are intended solely for the 
addressee(s) and may contain confidential 
and/or legally privileged information. If you 
are not the intended recipient of this message 
or if this message has been addressed to you 
in error, please immediately alert the sender
 by reply e-mail and then delete this message 
and any attachments. If you are not the 
intended recipient, you are notified that 
any use, dissemination, distribution, copying, 
or storage of this message or any attachment 
is strictly prohibited.







-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091116/f46d4b52/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 1990 bytes
Desc: image001.jpg
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091116/f46d4b52/attachment.jpe>


More information about the cisco-voip mailing list