[cisco-voip] CUCM Route List

[Mark Marquez]

Are there any special rules regarding H.323 and MGCP gateways configured within the same CUCM Route List.  I have a route list with two route groups.  RG1 has the H.323 GW.  RG2 has the MGCP GW.

RL-1
                RG1 (H.323)
                RG2  (MGCP)

In the above configuration, failover to the MGCP GW doesn't work.

RL-1
                RG2 (MGCP)
                RG1 (H.323)

I modify the Route List to include RG2 and then RG1 (as illustrated above) and failover works as expected.  FYI, I cause a failover by unplugging the T1 cable from the controller.

I also tested just using RG1 or RG2 within RL-1 and calls complete successfully.  Any help is appreciated.


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091116/de560975/attachment.html>