[cisco-voip] CUMA Lab vmware install

[Dane Newman]

its really odd but I think I found the issue.  I was giving it 80 gigs of
disk...when I gave it 100 it worked but 80 it would just hang there.  Odd
right?

oh well off to patch it twice now with 6 gigs of downloads heh



On Mon, Nov 16, 2009 at 4:40 PM, Matt Slaga (US)
<Matt.Slaga at us.didata.com>wrote:

>  I would also suggest 2.5Gb of ram or higher.
>
>
>
> *From:* cisco-voip-bounces at puck.nether.net [mailto:
> cisco-voip-bounces at puck.nether.net] *On Behalf Of *Jason Aarons (US)
> *Sent:* Monday, November 16, 2009 4:24 PM
> *To:* Dane Newman; Ryan Ratliff
>
> *Cc:* cisco-voip
> *Subject:* Re: [cisco-voip] CUMA Lab vmware install
>
>
>
> Don’t use the assisted install, tell it unknown OS that you’ll configure
> later. I’d bump my disk to 100GB(or 84GB)  it’s only going to use the disk
> space it needs and won’t actually fill up 100GB vmdk file  -jason
>
>
>
> *From:* cisco-voip-bounces at puck.nether.net [mailto:
> cisco-voip-bounces at puck.nether.net] *On Behalf Of *Dane Newman
> *Sent:* Monday, November 16, 2009 4:13 PM
> *To:* Ryan Ratliff
> *Cc:* cisco-voip
> *Subject:* Re: [cisco-voip] CUMA Lab vmware install
>
>
>
> I reconfigured it to be RHEL 4 32 bit and 80 gig IDE hard drive inside
> vmware and it's still freezing on the install....hmm
>
>
>
> has anyone been able to sucessfully install it on esxi?
>
>
>
> Dane
>
> On Mon, Nov 16, 2009 at 1:45 PM, Ryan Ratliff <rratliff at cisco.com> wrote:
>
> All of the 7.x UC apps I'm aware of are RHEL 4.  I don't know if that's
> causing your issue but give it a shot.
>
> -Ryan
>
>
> On Nov 16, 2009, at 1:18 PM, Dane Newman wrote:
>
> Hello Folks
>
> I am trying to install Cisco unified mobility advantage into esxi vmware
> test purposes.  I heard cuma can be installed into vmware but I am running
> into an issue where the install always freezes and eventually times out.
>  Inside my vmware esxi box I created a virtual machine with 2 gigs of ram 2
> cpus and 80 gig hard drive based on Red hat 3.  The cuma disk version is
> 7.0.1.1  It always freezes at the end of the install WHen the title says
> Post Application Install on running initilization scripts 2 of 45.  Does
> anyone have any advice or help to get it installed?
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>  ------------------------------
>
> *Disclaimer: This e-mail communication and any attachments may contain
> confidential and privileged information and is for use by the designated
> addressee(s) named above only. If you are not the intended addressee, you
> are hereby notified that you have received this communication in error and
> that any use or reproduction of this email or its contents is strictly
> prohibited and may be unlawful. If you have received this communication in
> error, please notify us immediately by replying to this message and deleting
> it from your computer. Thank you. *
>
> ------------------------------
>
> *Disclaimer: This e-mail communication and any attachments may contain
> confidential and privileged information and is for use by the designated
> addressee(s) named above only. If you are not the intended addressee, you
> are hereby notified that you have received this communication in error and
> that any use or reproduction of this email or its contents is strictly
> prohibited and may be unlawful. If you have received this communication in
> error, please notify us immediately by replying to this message and deleting
> it from your computer. Thank you. *
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091116/495f8cfb/attachment.html>