[cisco-voip] E1 Card and Voice ports 3845[Scanned]

[Martin Bufton]

I still cant get the thing to register.
I'm currently using a loopback plug as I wont get my E1 connect for a week or two.
 
Here is my config can any one see what Im missing? I have also included show ccm-manager
 
CCM is configure with the FQDN of the router MGCP-GW1-RT.**.local
 
#show run
version 12.4
no service pad
service timestamps debug datetime msec localtime show-timezone
service timestamps log datetime msec localtime show-timezone
service password-encryption
service sequence-numbers
!
hostname MGCP-GW1-RT
!
boot-start-marker
boot-end-marker
!
card type e1 0 0
logging buffered 51200 warnings
!
no aaa new-model
clock timezone GMT 0
clock summer-time BST recurring last Sun Mar 2:00 last Sun Oct 2:00
network-clock-participate wic 0
network-clock-select 1 E1 0/0/0
dot11 syslog
!
!
ip cef
!
!
no ip bootp server
no ip domain lookup
ip domain name **.local
multilink bundle-name authenticated
!
isdn switch-type primary-dpnss
voice-card 0
 no dspfarm
!
!
archive
 log config
  hidekeys
!
!
controller E1 0/0/0
 pri-group timeslots 1-31 service mgcp
!
controller E1 0/0/1
!
ip tcp synwait-time 10
!
!
!
!
interface Port-channel1
 description 
 ip address 172.16.74.100 255.255.255.0
 hold-queue 150 in
!
interface GigabitEthernet0/0
 description Member of Etherchannel conected to Core-Sw gig 2/0/19
 no ip address
 duplex auto
 speed auto
 media-type rj45
 channel-group 1
!
interface GigabitEthernet0/1
 description Member of Etherchannel conected to Core-Sw gig 1/0/19
 no ip address
 duplex auto
 speed auto
 media-type rj45
 channel-group 1
!
interface Serial0/0/0:15
 no ip address
 encapsulation hdlc
 isdn switch-type primary-dpnss
 isdn incoming-voice voice
 isdn bind-l3 ccm-manager
 no cdp enable
!
ip forward-protocol nd
!
voice-port 0/0/0:15
!
ccm-manager mgcp
ccm-manager config server 172.16.74.10
!
mgcp
mgcp call-agent 172.16.74.10 service-type mgcp version 1.0
!
mgcp profile default
!
!
!
dial-peer voice 1 pots
 service mgcpapp
 port 0/0/0:15
!

show ccm
MGCP Domain Name: MGCP-GW1-RT.**.local
Priority        Status                   Host
============================================================
Primary         Registering with CM      172.16.74.10
First Backup    None
Second Backup   None
Current active Call Manager:    None
Backhaul/Redundant link port:   2428
Failover Interval:              30 seconds
Keepalive Interval:             15 seconds
Last keepalive sent:            15:30:21 GMT Nov 18 2009 (elapsed time: 01:09:06)
Last MGCP traffic time:         16:39:24 GMT Nov 18 2009 (elapsed time: 00:00:04)
Last failover time:             None
Last switchback time:           None
Switchback mode:                Graceful
MGCP Fallback mode:             Not Selected
Last MGCP Fallback start time:  None
Last MGCP Fallback end time:    None
MGCP Download Tones:            Disabled
TFTP retry count to shut Ports: 2
Backhaul Link info:
    Link Protocol:      TCP
    Remote Port Number: 2428
    Remote IP Address:  172.16.74.10
    Current Link State: OPEN
    Statistics:
        Packets recvd:   0
        Recv failures:   0
        Packets xmitted: 0
        Xmit failures:   0
    PRI Ports being backhauled:
        Slot 0, VIC 0, port 0
FAX mode: cisco
Configuration Error History:


________________________________

From: emre yunus [mailto:yeerduran at gmail.com]
Sent: Wed 18/11/2009 2:41 PM
To: Martin Bufton
Subject: Re: [cisco-voip] E1 Card and Voice ports 3845[Scanned]


you need to specify the port
conf t
card type


On Wed, Nov 18, 2009 at 9:02 AM, Martin Bufton <m.bufton at spectra-group.co.uk> wrote:


	Good afternoon.

	 

	I need help with a PRI card, please.

	 

	It is installed in a Cisco 3845 running C3845-SPServicesK9-M 12.4 (15)T9

	The card is a VWIC2-2MFT-T1/E1 installed in HWIC0

	I plan to use this as a MGCP gateway.

	 

	I'm expecting to see the voice-ports in the configuration. but the running configure doesn't show anything about the presence of the card.

	 

	Show version reports "2 channelized (E1 or T1)/PRI ports"

	 

	Thanks in advance

	 


	_______________________________________________
	cisco-voip mailing list
	cisco-voip at puck.nether.net
	https://puck.nether.net/mailman/listinfo/cisco-voip
	
	


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091118/50eac16c/attachment.html>