[cisco-voip] abbr. dialing as a softkey

[Steve G]

Leave the phone on-hook.  Press the number of the speed dial you wish to
access and you will see the softkey AbbrDial appear.

On Mon, Nov 23, 2009 at 12:36 PM, Kathy Dupree
<KDupree at randolphcollege.edu>wrote:

>  I know I am missing something but for some reason I can’t figure out how
> to get the abbr. dialing softkey to come up on the display of a 7961 cisco
> phone.  All 6 lines are being used as lines so I need to set up speed dials
> using the abbr. dialing.  The cisco site is useless.  In the guide it tells
> you how to set it up, but if the abbr. dialing doesn’t show you can’t use
> it!  Thanks for your help, anyone!
>
>
>
>
>
> *[image: cid:image002.jpg at 01C9F3DF.4FC050B0]*
>
> *Katherine O. Dupree*
>
> *Telecommunications/User Support Analyst*
>
> *Randolph College*
>
> *2500 Rivermont Ave.*
>
> *Lynchburg, Va. 24503*
>
> *434 947 8371*
>
> *kdupree at randolphcollege.edu*
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091123/d881310c/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 2376 bytes
Desc: not available
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091123/d881310c/attachment.jpe>