[cisco-voip] PRI calls inactive for more than 24 hours

Tue Nov 24 05:48:01 EST 2009

Hi all,

I have a problem at 2 SRST sites. Customer does not allow any calls across the WAN, so all calls between the sites are PSTN calls. After about 2 months the customer had a call from Telco telling him that there is calls from both sites to the opposite site's Pilot number for more than 24 hours. How is this possible? I have PRI's with H.323 config. Is there a command that could disconnect inactive calls after some time? I need something like a disconnect supervision.

Louis

This email and all contents are subject to the following disclaimer:

"http://www.dimensiondata.com/emaildisclaimer.htm"
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091124/3c26f463/attachment.html>