[cisco-voip] Wacky telco issues... cannot call the UK

[Jonathan Charles]

OK, here's one that is stumping me...

CUCM 7.0, H.323 Gateways with 3 PRIs.

We can call all over Europe, Oceania, Asia... but not the UK.

Calls go out:

ch = primary-ni interface = User
Nov 30 17:07:21.704 CST: ISDN Se0/1/0:23 Q931: TX -> SETUP pd = 8
callref = 0x147B
        Bearer Capability i = 0x8090A2
                Standard = CCITT
                Transfer Capability = Speech
                Transfer Mode = Circuit
                Transfer Rate = 64 kbit/s
        Channel ID i = 0xA98397
                Exclusive, Channel 23
        Calling Party Number i = 0x2181, '8475552096'
                Plan:ISDN, Type:National
        Called Party Number i = 0x91, '011441787883195'
                Plan:ISDN, Type:International
Nov 30 17:07:21.744 CST: ISDN Se0/1/0:23 Q931: RX <- CALL_PROC pd = 8
callref = 0x947B
        Channel ID i = 0xA98397
                Exclusive, Channel 23
MC003137#
Nov 30 17:07:21.744 CST: ISDN Se0/1/0:23 Q931: RX <- PROGRESS pd = 8
callref = 0x947B
        Cause i = 0x829F - Normal, unspecified


And fail.

On the Route Pattern, we are forcing plan and type to unknown/unknown;
telco came in and made these calls successfully from the smartjacks; I
have a dial peer invoking a translation profile:


!
voice translation-rule 2
 rule 1 // // type international unknown plan isdn unknown
!
!voice translation-profile UK
 translate called 2
!


!
dial-peer voice 60 pots
 translation-profile outgoing UK
 destination-pattern 01144T
 port 0/0/0:23
 prefix 01144
!

There are no transformation patterns on the system, there are no
translation patterns on the system; every other international call
succeeds without any issue (plan and type are unknown)...


Any ideas? I seriously have no idea where this plan and type are
coming from, or how to get rid of them...