[cisco-voip] Cisco CRS Development prompt problem.

[Tanner Ezell]

If all you are trying to do is use the generic AutoAttendant with a special
opening prompt, record your prompt and pass it as the parameter for the
application.

Remember to record the audio in G711 ulaw mono 8bit 64,000hz.

On Mon, Oct 5, 2009 at 6:41 PM, Arnold Lesar <arnoldlesar at yahoo.co.uk>wrote:

> Dear Jhon,
>
> actually i'm new guy in VoIP 'couse my company ask me to modify auto
> attendant company.
> thanks for the answer.
> so, it means, that first i have to upload prompt next step i called in CRS
> Editor
> is it true?
> because i try to use P[C:\AA\file.wav] or P[\AA\file.wav] it couldn't work.
>
> thx
>
> Regards,
>
>
> Arnold Samuel Lesar
>
>
> ------------------------------------------------------
> Note: This message was created by ARNOLD SAMUEL LESAR.
> ------------------------------------------------------
>
>
> --------------------------------------------------------------------------
> --------------------------------------------------------------------------
> PT. PELITA RELIANCE INTERNATIONAL
> Eka Hospital BSD City, Tangerang
> Address : CBD Lot IX, BSD City, Tangerang
> Phone : (+62-21) 256 555 55
> Fax : (+62-21) 256 555 44
> --------------------------------------------------------------------------
> --------------------------------------------------------------------------
>
> ------------------------------
> *From:* "Robben, John" <JRobben at naic.org>
> *To:* Arnold Lesar <arnoldlesar at yahoo.co.uk>
> *Sent:* Tuesday, 6 October, 2009 0:15:49
> *Subject:* RE: [cisco-voip] Cisco CRS Development prompt problem.
>
> Arnold,
>
> SP[] is a "System" prompt, and should not be modified.
> You can upload "User" prompts (P[]) by using the prompt management portion
> located on the Appadmin page, and modify your script accordingly.
>
> Regards,
>
> John
>
>  ------------------------------
> *From:* cisco-voip-bounces at puck.nether.net [mailto:
> cisco-voip-bounces at puck.nether.net] *On Behalf Of *Arnold Lesar
> *Sent:* Monday, October 05, 2009 3:19
> *To:* cisco-voip at puck.nether.net
> *Subject:* [cisco-voip] Cisco CRS Development prompt problem.
>
>  Dear all,
>
> i have some problem with crs editor.
> this is the problem :
> i just wanna try to modify my IVR with cisco CRS Editor ver 4.0. i'm start
> with aa.aef file, first i want to modify a prompt SP[], but i can not change
> that prompt. does anyone knows about this prompt? and how to insert .wav
> file into crs editor so i can use .wav my file?
>
> thanks for your help guys.
>
> Regards,
>
>
> Arnold Samuel Lesar
>
>
> ------------------------------
>
> * CONFIDENTIALITY NOTICE This message and any attachments are from the
> NAIC and are intended only for the addressee. Information contained herein
> is confidential, and may be privileged or exempt from disclosure pursuant to
> applicable federal or state law. This message is not intended as a waiver of
> the confidential, privileged or exempted status of the information
> transmitted. Unauthorized forwarding, printing, copying, distribution or use
> of such information is strictly prohibited and may be unlawful. If you are
> not the addressee, please promptly delete this message and notify the sender
> of the delivery error by e-mail or by calling the NAIC Help Desk at
> (816)783-8500. *
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>


-- 
Regards,
Tanner Ezell
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091005/f47547e2/attachment.html>