[cisco-voip] adding subscriber in the CUCM cluster

[Scott Kee]

Yep that was the issue.

Thanks for the help.

scott


-----Original Message-----
From: Adam Frankel [mailto:afrankel at cisco.com] 
Sent: Tuesday, October 06, 2009 8:36 PM
To: Scott Kee
Cc: cisco-voip mailinglist
Subject: Re: [cisco-voip] adding subscriber in the CUCM cluster

You could try activating the "Cisco CallManager" service on the Subscriber.

Adam

-------- Original Message  --------
Subject: [cisco-voip] adding subscriber in the CUCM cluster
From: Scott Kee <SKee at cmsstl.com>
To: cisco-voip mailinglist <cisco-voip at puck.nether.net>
Date: 10/6/09 12:48 PM

I am trying to setup a test CUCM cluster in my test lab.  I've setup
CUCM Publisher and Subscriber using VMware v2.

I tweaked MAC Addresses so both Publisher and Subscriber has MAC address
as production server.

I installed License keys so CUCM has 2 server and  devices licenses.  So
I think I am good as far as licenses concern.

 

I installed Publisher and works fine however I installed Subscriber but
it is not showing up in the CUCM Group.

It only shows Publisher.   I configured subscriber in the System->Server
and System->Cisco Unified UM before I installed Subscriber.

 

Do I need to change anything after the installation?

 


------------------------------------------------------------------------

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip