[cisco-voip] Unity Connection 7.1(2) change default to Easy Sign-In ?

[Pat Hayes]

To change this on the caller-input settings for existing users, bulk
edit is the way to go. To change the 'default', you would need to edit
whatever template(s) you use to create users, that is where the
settings that are applied to the user at the time of creation are
pulled from.

On Sun, Oct 11, 2009 at 1:37 PM, Lelio Fulgenzi <lelio at uoguelph.ca> wrote:
> You can't edit the default conversation, however, you can edit one of three
> custom keypad mappings if you like and assign these to the users.
>
> Alternatively, you can bulk edit all existing user input maps to use easy
> sign-in and then change your user template.
>
> That's just from what I read online and saw in the config files.
>
> Have you tried any of the above?
>
> ---
> Lelio Fulgenzi, B.A.
> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
> (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> "Bad grammar makes me [sic]" - Tshirt
>
>
> ----- Original Message -----
> From: "Jason Aarons (US)" <jason.aarons at us.didata.com>
> To: "Lelio Fulgenzi" <lelio at uoguelph.ca>
> Cc: cisco-voip at puck.nether.net
> Sent: Sunday, October 11, 2009 8:58:49 AM GMT -05:00 US/Canada Eastern
> Subject: RE: [cisco-voip] Unity Connection 7.1(2) change default to Easy
> Sign-In ?
>
> Has to with when you call your phone, goes to voicemail and you press * to
> sign-in.  I want my * to be Easy Sign-In as system default.
>
>
>
> Above table 14-2
>
> http://www.cisco.com/en/US/docs/voice_ip_comm/connection/7x/administration/guide/7xcucsag130.html#wp1052877
>
>
>
> Logging On to Cisco Unity Connection from a User Greeting
>
> Caller input settings allow you to specify how users log on to Cisco Unity
> Connection when they are listening to a user greeting. By using the caller
> input settings you can specify which keys users can press to interrupt a
> user greeting so that they can log on to Connection, and what users hear
> after Connection prompts them to log on.
>
> You specify caller input settings on the user template and on individual
> user pages in Cisco Unity Connection Administration. Caller input settings
> work for a particular greeting only when the Ignore Additional Input check
> box is not checked on the applicable Greetings page for the user template or
> individual user in Connection Administration.
>
> By default, Connection is set up so that users hear the Connection Sign-In
> conversation, which prompts them for their ID and password when they press *
> during any user greeting—either their own or another user greeting. As an
> alternative, you can accommodate users who want an easier way to log on from
> their own greeting by offering the Easy Sign-In conversation, which prompts
> users only for a password.
>
> Table 14-2 summarizes the options available to you for specifying how users
> log on to Connection from their own greeting or from another user greeting.
>
>
>
>
>
> From: Lelio Fulgenzi [mailto:lelio at uoguelph.ca]
> Sent: Saturday, October 10, 2009 9:52 PM
> To: Jason Aarons (US)
> Cc: cisco-voip at puck.nether.net
> Subject: Re: [cisco-voip] Unity Connection 7.1(2) change default to Easy
> Sign-In ?
>
>
>
> can you explain sign-in vs easy sign-in?
>
> ---
> Lelio Fulgenzi, B.A.
> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
> (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> "Bad grammar makes me [sic]" - Tshirt
>
>
> ----- Original Message -----
> From: "Jason Aarons (US)" <jason.aarons at us.didata.com>
> To: cisco-voip at puck.nether.net
> Sent: Saturday, October 10, 2009 9:49:21 PM GMT -05:00 US/Canada Eastern
> Subject: [cisco-voip] Unity Connection 7.1(2) change default to Easy Sign-In
> ?
>
>
> How do I get Cisco Unity Connection version: 7.1.2ES18 so that when users
> Caller Input * to use Easy Sign-In ?
>
> I normally Import a couple hundred new Unity users a week and want to change
> the system default from Sign-In to Easy Sign-In. I'd rather not do it with a
> template but want to change the system default to Easy Sign-In.
>
> ________________________________
>
> Disclaimer: This e-mail communication and any attachments may contain
> confidential and privileged information and is for use by the designated
> addressee(s) named above only. If you are not the intended addressee, you
> are hereby notified that you have received this communication in error and
> that any use or reproduction of this email or its contents is strictly
> prohibited and may be unlawful. If you have received this communication in
> error, please notify us immediately by replying to this message and deleting
> it from your computer. Thank you.
>
> _______________________________________________ cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
> ________________________________
>
> Disclaimer: This e-mail communication and any attachments may contain
> confidential and privileged information and is for use by the designated
> addressee(s) named above only. If you are not the intended addressee, you
> are hereby notified that you have received this communication in error and
> that any use or reproduction of this email or its contents is strictly
> prohibited and may be unlawful. If you have received this communication in
> error, please notify us immediately by replying to this message and deleting
> it from your computer. Thank you.
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>