[cisco-voip] SRST testing

[Tim Smith]

Theres already been a fair bit of chat about this, so its always worth
searching the archives.

My preference is to setup an ACL which blocks access between the phones and
the callmanagers
If you are using MGCP and trying to test MGCP fallback to H323 you need to
block the MGCP stuff from the gateway as well.

Cheers,

Tim.

On Tue, Oct 13, 2009 at 2:43 PM, David James <spunkymunky56 at gmail.com>wrote:

> Hi,
>      I would to do an audit on SRST at all my remote sites and have been
> trying to find a way to do so without anybody else being on site to unplug
> the WAN cable. any ideas on how the best to do this? I believe there is a
> command to invoke srst but i cant seem to find it. any help is appreciated.
>
> David
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091013/88ff9258/attachment.html>