[cisco-voip] CNAME over QSIG

[Wes Sisk]

You might check the PBX interop portal to see if it should work and 
required versions/configs:
http://www.cisco.com/en/US/netsol/ns728/networking_solutions_program_category_home.html

/Wes


On Thursday, October 15, 2009 11:20:07 PM, malhatma <malhatma at gmx.net> 
wrote:
> Hi,
>
> is it somehow possible to get a CNAME in a facility message, when 
> being called over a QSIG trunk?
> Setup:
> AvayaGW-QSIG Trunk (ISO)-3825(12.4T)-MGCP-CUCM6.1
> Calling name, calling number & called number is working in both 
> directions. But called name is only working from Cisco side. When an 
> Avaya phone calls a Cisco phone the IOS gw doesn't send a called name 
> in facility msg (Alerting, Proceeding). I'm not able to find anything 
> helpfull at the Cisco site. Is it not supported? Would be strange. Any 
> suggestions are welcome.
>
> Regards
> Andre
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip