[cisco-voip] Delay in off in MWI

[Lelio Fulgenzi]

Open up your port status monitor and look to see what's happening. There might be some issues that you are not aware of. You might see a 10 to 15 second delay, but not 1 min. 

Do you have some ports reserved for MWI? Are all your ports in use perhaps? 

--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
"Bad grammar makes me [sic]" - Tshirt 


----- Original Message ----- 
From: "Lisa Notarianni" <notariannil1 at scranton.edu> 
To: "Ed Leatherman" <ealeatherman at gmail.com> 
Cc: cisco-voip at puck.nether.net 
Sent: Friday, October 16, 2009 1:35:19 PM GMT -05:00 US/Canada Eastern 
Subject: Re: [cisco-voip] Delay in off in MWI 

No - after I listen to my voice mail and either delete or save calls then hang up, the light takes about 1 minute to go off. 

Ed Leatherman wrote: 

Do you mean when you do a MWI resynch? if so ..1 minute is pretty fast ;) Ours takes like an hour. 


On Fri, Oct 16, 2009 at 12:41 PM, Lisa Notarianni < notariannil1 at scranton.edu > wrote: 



I'm on a roll today with my questions... 

We have about a 45 second to 1 minute delay in the MWI turning off after we processed all messages. 

Is there anyway to tweak this? 

-- 
-- 
Ed Leatherman 



-- 

_______________________________________________ cisco-voip mailing list cisco-voip at puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091016/7277f069/attachment.html>