[cisco-voip] CME supporting PSTN fallback

[Aman Chugh]

No, this is not the correct way to accomplish this.

Try looking at CME design guide on configuring redundancy between CME
routers and explore options HSRP.

HTH
Aman

On Sun, Oct 25, 2009 at 11:12 PM, anand <anand.eee at gmail.com> wrote:

> Hi
>
> I have 2 3845 routers installed with CME in them .I provided back to back
> connection to the router .I also provided analog path to them.
>
> My dial-peers are as below
>
> dial-peer voice 1 voip
>   destination-pattern 2000
>   session target ipv4:10.10.10.33
>
> dial-peer voice 2 pots
>   destination-pattern 2000
>   port 0/2/3
>   forward-digits all
>
> If i disconnect the WAN link and call 2000 the router makes a call through
> the voice ports.My question is can CME support pstn fallback.
>
>
>
> On Sun, Oct 25, 2009 at 1:38 AM, Aman Chugh <aman.chugh at gmail.com> wrote:
>
>> You can use it instead of SRST in  a CCM deployment.
>>
>> Try to search the archives of this list there have been lot of discussion
>> on this before as well.
>>
>> HTH
>> Aman
>>
>>  On Sun, Oct 25, 2009 at 9:45 AM, anand <anand.eee at gmail.com> wrote:
>>
>>> Hi
>>>
>>> Can someone explain whether Call Manager Express supports PSTN fallback.
>>>
>>> _______________________________________________
>>> cisco-voip mailing list
>>> cisco-voip at puck.nether.net
>>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091025/77f27a66/attachment.html>