[cisco-voip] dtmf from cucm to 2821 cube to sip trunk

[Dane Newman]

Thanks for the reply Nick

I debugged voip rtp named-event and when I tried to hit 1 in the call for
dtmf nothing came out of the debug.  Could this possibly mean on my side Im
not sending dtmf to the service provider?

Dane

On Tue, Oct 27, 2009 at 4:30 PM, Nick Matthews <matthnick at gmail.com> wrote:

> That shows up in the debugs in working scenarios too.  Not sure what
> the importance of those statements are, but it's the type of thing you
> see when you add 'all' to a debug.
>
> It's not the 183 you want to look at, but the 200 OK with the CSeq of
> your INVITE.  And you want a 200 OK.  I've seen it where the debugs
> will show that we're sending DTMF but the provider won't use it, which
> is a conversation you would need to have with the provider.
>
> -nick
>
> On Tue, Oct 27, 2009 at 3:45 PM, Dane Newman <dane.newman at gmail.com>
> wrote:
> > Hmm that does not sound good
> >
> > This is with the default settings
> >
> > rtp payload-type nte 101
> > rtp payload-type nse 100
> >
> > which don't show up in the config.  Could there be any reason why the
> router
> > is not able to use 101 below are my dial peers
> >
> > dial-peer voice 100 voip
> >  description AA Publisher
> >  preference 1
> >  destination-pattern 1..
> >  voice-class h323 50
> >  session target ipv4:10.1.80.10
> >  dtmf-relay h245-alphanumeric
> >  codec g711ulaw
> >  no vad
> > !
> > dial-peer voice 1000 voip
> >  description incoming Call
> >  translation-profile incoming aa
> >  preference 1
> >
> >  incoming called-number 6784442454
> >
> >  dtmf-relay rtp-nte
> >  codec g711ulaw
> >  ip qos dscp cs5 media
> >  ip qos dscp cs5 signaling
> >  no vad
> > !
> > dial-peer voice 101 voip
> >  description AA Subscriber
> >  preference 2
> >  destination-pattern 1..
> >  voice-class h323 50
> >  session target ipv4:10.1.80.11
> >  dtmf-relay h245-alphanumeric
> >  codec g711ulaw
> >  no vad
> > !
> > dial-peer voice 2000 voip
> >  description outbound
> >  translation-profile outgoing addone
> >  preference 1
> >  destination-pattern .T
> >
> >  progress_ind setup enable 3
> >  progress_ind progress enable 8
> >  session protocol sipv2
> >  session target dns:did.voip.les.net
> >
> >  dtmf-relay rtp-nte
> >  codec g711ulaw
> >
> > !
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091027/c1726f17/attachment.html>