[cisco-voip] PRI Loopback?

[Lelio Fulgenzi]

you know, i think all our T1 ports have loopback buttons on them. do yours? 

--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
"Bad grammar makes me [sic]" - Tshirt 


----- Original Message ----- 
From: "Jason Fuermann" <JBF005 at shsu.edu> 
To: "Jonathan' 'Madziarczyk" <JMad at cityofevanston.org>, cisco-voip at puck.nether.net 
Sent: Wednesday, October 28, 2009 3:36:01 PM GMT -05:00 US/Canada Eastern 
Subject: Re: [cisco-voip] PRI Loopback? 




http://www.cisco.com/en/US/tech/tk713/tk628/technologies_tech_note09186a008010059a.shtml 







From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Madziarczyk, Jonathan 
Sent: Wednesday, October 28, 2009 2:34 PM 
To: cisco-voip at puck.nether.net 
Subject: [cisco-voip] PRI Loopback? 



So I’m in the middle of testing a PRI with the Carrier, and they’re asking me to put a loopback on the device. 



Makes sense, but does anyone have a wiring diagram for what pins I need to loop? 



Is there a way to do this in IOS? 



JM 
_______________________________________________ cisco-voip mailing list cisco-voip at puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091028/cb7a2f62/attachment.html>