[cisco-voip] PRI Loopback?

[Fuermann, Jason]

No, it’s done in software on ours

From: Lelio Fulgenzi [mailto:lelio at uoguelph.ca]
Sent: Wednesday, October 28, 2009 2:39 PM
To: Fuermann, Jason
Cc: Jonathan' 'Madziarczyk; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] PRI Loopback?

you know, i think all our T1 ports have loopback buttons on them. do yours?

---
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
"Bad grammar makes me [sic]" - Tshirt


----- Original Message -----
From: "Jason Fuermann" <JBF005 at shsu.edu>
To: "Jonathan' 'Madziarczyk" <JMad at cityofevanston.org>, cisco-voip at puck.nether.net
Sent: Wednesday, October 28, 2009 3:36:01 PM GMT -05:00 US/Canada Eastern
Subject: Re: [cisco-voip] PRI Loopback?


http://www.cisco.com/en/US/tech/tk713/tk628/technologies_tech_note09186a008010059a.shtml


From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Madziarczyk, Jonathan
Sent: Wednesday, October 28, 2009 2:34 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] PRI Loopback?

So I’m in the middle of testing a PRI with the Carrier, and they’re asking me to put a loopback on the device.

Makes sense, but does anyone have a wiring diagram for what pins I need to loop?

Is there a way to do this in IOS?

JM

_______________________________________________ cisco-voip mailing list cisco-voip at puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091028/88af37f4/attachment.html>