[cisco-voip] Upgrade CUCMBE - Reboot/Switch Version order

Carter, Bill bcarter at sentinel.com
Thu Oct 29 11:08:25 EDT 2009


Found it.

 

http://www.cisco.com/en/US/docs/voice_ip_comm/connection/compatibility/m
atrix/cucsccpmtx.html#wp38791

 

Unity Connection 2.1(2)  <-> UCM 7.1(x), 7.0(x), 6.1(x), 6.0(x), 5.1(x),
5.0(x), 4.3(x), 4.2(x), 4.1(3)

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Carter, Bill
Sent: Thursday, October 29, 2009 9:59 AM
To: Ryan Ratliff
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Upgrade CUCMBE - Reboot/Switch Version order

 

I sure there are software version compatibility requirements between UCM
and UC. I can't find the matrix. 

 

From: Ryan Ratliff [mailto:rratliff at cisco.com] 
Sent: Thursday, October 29, 2009 9:59 AM
To: Carter, Bill
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Upgrade CUCMBE - Reboot/Switch Version order

 

I was under the impression that UC upgrades are tied to CUCM upgrades.
I know I've seen fixes for both in CUCM ES readme files.

 

-Ryan

 

On Oct 29, 2009, at 10:42 AM, Carter, Bill wrote:

 

I am preparing for a CUCMBE upgrade. I am going from UCM 6.1(2) and
Connection 2.1. Reading the documentation I perform separate software
upgrades for UCM and UC.

 

Should I perform the UCM upgrade and reboot to the new partition, then
perform the UC upgrade and switch to the new partition?

 

Can I perform both upgrades, then reboot?

 

Do I reboot/switch version in UCM, then when the server is up,
reboot/switch version for UC?

 

 

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091029/728394e6/attachment.html>


More information about the cisco-voip mailing list