[cisco-voip] CUCM6+E1 PRI A-law

[Ryan Ratliff]

Correct, there is no way to change that preference.  We have a knob  
for turning off g.722 but that's it.

-Ryan

On Oct 29, 2009, at 3:34 PM, Oleg Skomorokhov wrote:

And looks like there's no way to reorder that preference.
Well, thanks anyway.

On Thu, Oct 29, 2009 at 10:08 PM, Ryan Ratliff <rratliff at cisco.com>  
wrote:
Not that I can tell.  CUCM makes no distinction between a-law and u- 
law for g.711.  The only reason a phone would use one vs the other is  
if the device the phone was talking to only advertised one and not the  
other.   Internally to CUCM there is a preference among codecs that  
use the same bandwidth.  For the 64kbps codecs this preference is g. 
722, g.711u, g.711a.

-Ryan

On Oct 29, 2009, at 2:59 PM, Oleg Skomorokhov wrote:

it's set to a-law, but no luck.

but forget the pri, is there a way to get intracluster calls negotiate  
711 a-law ? i mean between 2 nearby ip phones.

On Thu, Oct 29, 2009 at 9:41 PM, Ryan Ratliff <rratliff at cisco.com>  
wrote:
What is set for the PCM Type in the CCMAdmin web page for the PRI?

That's the only place I can see where you can set a-law vs u-law.

-Ryan

On Oct 29, 2009, at 2:36 PM, Oleg Skomorokhov wrote:

There are some problems when talking with TELCO's support. some  
cracking and knocking sounds. No slips or other errors on E1 present.

But mostly, it's just annoying me. Why should i use u-law in europe,  
if it was designed for US?

So, even if we forget the E1 PRI, how to make the INTRAcluster calls  
to negotiate g711 A-law codec?..

On Thu, Oct 29, 2009 at 9:31 PM, Ryan Ratliff <rratliff at cisco.com>  
wrote:
The compand type on your POTS leg has nothing to do with the codec or  
compand type on the voip leg.

Is this causing any problems or just something you noticed?

-Ryan

On Oct 29, 2009, at 2:20 PM, Oleg Skomorokhov wrote:

Hello all.

I've got a e1 pri line in my office, terminating by cisco 2821. The  
compand type for E1 (Europe) is A-law, and show voice port 0/0/0:15  
also tells me that.
E1 is registered via mgcp, and i also see the compand type A-law in  
options there.

When i press the question button twice during the pstn call, the  
negotiated codec is u-law.

The default codec in Region is "G711" (no option for a-law or u-law)

Is there such an option in CUCM to change the default modulation type  
for g711 codec?

Thank you.
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip





-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091029/14c2fb5f/attachment.html>