[cisco-voip] Cisco 2610 and CME

[Brion Washington]

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/requirements/guide/cme41
spc.htm

 

 

 

This should get you in the right direction.

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Oddiraju, Kiran @
London SMC
Sent: Wednesday, September 02, 2009 7:47 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Cisco 2610 and CME

 

Hi guys,

 

I have a Cisco 2610 router that I want to use it at home and connect couple
Cisco phones. Does a 2610 support CCME 4x and what type of modules do I need
to buy to support a FXO card? It has 2x WIC/VIC slots and 1x NM module slot.
Do I need to buy an NM module or PVDM to support FXO card?

 

Many thanks.

 

CB Richard Ellis Limited, Registered Office: St Martin's Court, 
10 Paternoster Row, London, EC4M 7HP, registered in England and Wales No.
3536032. 
Regulated by the RICS and an appointed representative of CB Richard Ellis 
Indirect Investment Services Limited which is authorised and regulated by
the Financial Services Authority.
 
This communication is from CB Richard Ellis Limited or one of its 
associated/subsidiary companies. This communication contains information 
which is confidential and may be privileged. If you are not the intended
recipient, 
please contact the sender immediately. Any use of its contents is strictly
prohibited 
and you must not copy, send or disclose it, or rely on its contents in any
way whatsoever. 
Reasonable care has been taken to ensure that this communication 
(and any attachments or hyperlinks contained within it) is free from
computer viruses. 
No responsibility is accepted by CB Richard Ellis Limited or its
associated/subsidiary 
companies and the recipient should carry out any appropriate virus checks.
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090902/1ba1ea35/attachment.html>