[cisco-voip] IP Overhead Paging Speaker

[Jonathan Charles]

It is not recommended for large SRST sites... but if you have complex
hunt groups that MUST work in fallback, then it is really your only
option...

And you can make it look like SRST:

telephony-service
 system message CM Fallback Operations




Jonathan

On Thu, Sep 10, 2009 at 11:09 AM, Robert Kulagowski <rkulagow at gmail.com> wrote:
> Jonathan Charles wrote:
>>
>> The IP Speakers I have heard about are all multicast,so if you use
>> CCME as SRST, and use a multicast paging IP, you should be fine...
>> assuming codecs work...
>
> Ay, that's the rub.  We don't use CCME for SRST mode. :(
>
> But it's something to investigate.  Since our users are used to reduced
> functionality in straight SRST mode, if we could get CME to "look" like SRST
> then it may be a starter.  We just don't want to get into having to perform
> one set of M-A-C's in Call Manager, and then try to do something similar in
> CME.  (Too bad there's no magic button on Call Manager that would push a CME
> config)
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>