[cisco-voip] Monitoring DHCP utilization rates on UCM

[Lelio Fulgenzi]

I usually start with "file list activelog *" , but I don't see anything. 

--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
"Bad grammar makes me [sic]" - Tshirt 


----- Original Message ----- 
From: "Cristobal Priego" <cristobalpriego at gmail.com> 
To: "Lelio Fulgenzi" <lelio at uoguelph.ca> 
Cc: "Robert Kulagowski" <rkulagow at gmail.com>, cisco-voip at puck.nether.net 
Sent: Thursday, September 10, 2009 5:29:47 PM GMT -05:00 US/Canada Eastern 
Subject: Re: [cisco-voip] Monitoring DHCP utilization rates on UCM 

While I was on the boot camp 1 month ago. 
it was one of the questions when we started the bootcamp and Vik couldn't find the query or the command on the cli to see the bindings. i've been trying to find the command i went to every command on the cli and i couldn't find it 


if you happen to find it, it would be a great feedback 




2009/9/10 Lelio Fulgenzi < lelio at uoguelph.ca > 




That's the impression I got as well. 

I'm just looking at the v7 interface now and there is two options for DHCP. Create/start/stop DHCP servers and Create/start/stop DHCP subnets. 

There might be a way to use the CLI and "file view" commands to see the logs, etc. But that would hurt so much. 


--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
"Bad grammar makes me [sic]" - Tshirt 





----- Original Message ----- 
From: "Robert Kulagowski" < rkulagow at gmail.com > 
To: "Ccie" < pav.ccie at gmail.com > 
Cc: cisco-voip at puck.nether.net 
Sent: Thursday, September 10, 2009 5:05:32 PM GMT -05:00 US/Canada Eastern 
Subject: Re: [cisco-voip] Monitoring DHCP utilization rates on UCM 

Ccie wrote: 
> UCM 7.0 
> Does anybody know if there is a way to monitor the DHCP server 
> integrated into UCM. 
> I am trying to get a list of bindings/ measure utilization rate and 
> curious if there Is a way to do it on UCM / RTMT 

I'm 99% sure that I saw in this forum that using the built-in DHCP server 
is strongly discouraged, with the above being one of the things that it lacks. 
_______________________________________________ 
cisco-voip mailing list 
cisco-voip at puck.nether.net 
https://puck.nether.net/mailman/listinfo/cisco-voip 

_______________________________________________ 
cisco-voip mailing list 
cisco-voip at puck.nether.net 
https://puck.nether.net/mailman/listinfo/cisco-voip 


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090910/6168c7b0/attachment.html>