[cisco-voip] No audio issue with IP Phones over VPN

[Jonathan Charles]

OK, that doesn't appear to be working... I have multiple subnets (site
to site, and two remote access IP ranges)....

I have crypto maps tying them all together...

It just doesn't work.


J

On Fri, Sep 11, 2009 at 12:34 PM, Jonathan Charles <jonvoip at gmail.com> wrote:
> I have the same-security-traffic commands... missing the no nat, thanks!
>
> I will have them test it again
>
> J
>
> On Fri, Sep 11, 2009 at 12:31 PM, Brian <bms314 at gmail.com> wrote:
>> 'same-security-traffic permit intra-interface' should do it for you.
>>
>> Also make sure your remote subnets are in the nonat ACL.
>>
>> Brian
>>
>> On Fri, Sep 11, 2009 at 12:02 PM, Jonathan Charles <jonvoip at gmail.com>
>> wrote:
>>>
>>> I am sure this is an ASA issue...
>>>
>>> VPN callers can call the main office with no problem... audio works
>>> great...
>>>
>>> However, when VPN clients call each other, their is no audio..;.
>>>
>>> I know this is a hairpin issue on the ASA, but I am not a security guy....
>>>
>>> So, how do you fix this?
>>>
>>> ASA 5510 running 8.0(4)
>>>
>>>
>>>
>>> Jonathan
>>> _______________________________________________
>>> cisco-voip mailing list
>>> cisco-voip at puck.nether.net
>>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>>
>