[cisco-voip] SRST short dials

[Daniel]

Colin,

Depends if they're internal or external.

Using dial peers you can use translation rules and profiles to manipulate
the digits.

Or you could use the dial plan patterns, *"dialplan-pattern 1 588282..
extension-length 6 extension-pattern 6682.. no-reg"
*
Give an example of what you are trying to do.

cheers,

Dan



On Mon, Sep 14, 2009 at 3:42 PM, Colin McAllister <colinmca at gmail.com>wrote:

> My first post to the list, hello everyone - please be gentle!
>
> I'm about to decomission a site this morning (uk) that has a small
> office linked through it - causing the local gateway to go into SRST
> until I can get QOS enabled on it's backup link.
>
> The local users are used to dialling three digit short-codes for a few
> frequently used numbers. Is there any way to setup these in SRST mode?
>
> Thanks for any help you can offer.
>
> Regards,
>
> Colin
>
> --
> Sent from my mobile device
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090914/06d1a525/attachment.html>