[cisco-voip] That's weird: analog paging has no voice path in 12.4(24)T1, but works in 12.4(15)

[Justin Steinberg]

are you using a FXS interface?  almost sounds like maybe a battery reversal
mismatch could be disconnecting the call just after you hear the paging
tone.    if it is FXS, you could try toggling the 'battery-reversal'
commands.    I doubt there would be a default IOS behavior change related to
battery-reversal between 12.4(15)T and 12.4(24)T but it's worth a try.  I
think you have to 'shut'/'no shut' the port after you make the config
change.
On Mon, Sep 14, 2009 at 10:19 PM, Robert Kulagowski <rkulagow at gmail.com>wrote:

> Nick Matthews wrote:
>
>> This almost reminds me of CSCsy75002.
>>
>> Can you try one of the fixed versions?
>>
>
> We're already running:
> c2800nm-ipvoicek9-mz.124-24.T1.bin
>
> And that's the IOS that's exhibiting the problem.
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090914/de4eac5e/attachment.html>