[cisco-voip] Fax over PRI

[Jason Aarons (US)]

No issues, it's normal.  Check your T1 for clock slips, normal dirty T1
stuff.  If your running VG224/ATA across a WAN look at using modem
passthrough.

PS Hope you've been doing well!

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Damien Ball
Sent: Tuesday, September 15, 2009 12:20 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Fax over PRI

Just curious about running fax data across a PRI.  What is the general  
consensus on doing this?  Are there any problems with this type of  
situation?
--
Damien Ball
Network Engineer
Granville County Schools
101 Delacroix Street
Oxford, NC  27565
Email:  balld at gcs.k12.nc.us
Office:  919-690-2339
Fax:      919-690-2338

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.