[cisco-voip] CallerIP trough FXO port

Ratko Dodevski rade239 at gmail.com
Wed Sep 16 15:37:45 EDT 2009


Hi Dane,I solved my problem... It was the GSM adapter :))) I plugged phone
with Caller Id and find out that GSM doesn't provide CLID. So I connected to
the adapter and set it to send CLID.


Best Regards
Ratko

On Wed, Sep 16, 2009 at 6:25 PM, Dane Newman <dane.newman at gmail.com> wrote:

> My full router config is as follows
>
> Cisco2801#sh run
> Building configuration...
>
> Current configuration : 9848 bytes
> !
> version 12.4
> service timestamps debug datetime msec
> service timestamps log datetime localtime
> service password-encryption
> !
> hostname Cisco2801
> !
> boot-start-marker
> boot-end-marker
> !
> logging message-counter syslog
> no logging buffered
> no logging monitor
> enable secret 5 $1$Sz.G$hunXhcScXrQkHmAllKj4.0
> !
> aaa new-model
> !
> !
> aaa authentication login default local
> aaa authentication login ezvpnuserauth local
> aaa authorization exec default local
> aaa authorization network default local
> aaa authorization network ezvpngroupauth local
> !
> !
> aaa session-id common
> errdisable recovery cause bpduguard
> errdisable recovery interval 400
> dot11 syslog
> ip source-route
> !
> !
> !
> !
> ip cef
> no ip domain lookup
> ip domain name datasc.local
> ip inspect udp idle-time 1800
> ip inspect name CBAC tcp
> ip inspect name CBAC udp
> ip inspect name CBAC icmp
> no ipv6 cef
> ntp server 129.6.15.28
> !
> multilink bundle-name authenticated
> !
> !
> !
> !
> !
> !
> trunk group FXOPORTS
> !
> !
> !
> voice service pots
> !
> voice service voip
>  fax protocol cisco
>  h323
>   no h225 timeout keepalive
> !
> !
> !
> !
> !
> !
> voice class h323 50
>   h225 timeout tcp establish 3
> !
> !
> !
> !
> !
> !
> !
> !
> !
> !
> !
> voice-card 0
>  dsp services dspfarm
> !
> !
> application
>  global
>   service alternate default
>  !
> !
> !
> crypto pki trustpoint TP-self-signed-2766443098
>  enrollment selfsigned
>  subject-name cn=IOS-Self-Signed-Certificate-2766443098
>  revocation-check none
>  rsakeypair TP-self-signed-2766443098
> !
> !
> crypto pki certificate chain TP-self-signed-2766443098
>  certificate self-signed 01
>   3082024E 308201B7 A0030201 02020101 300D0609 2A864886 F70D0101 04050030
>   31312F30 2D060355 04031326 494F532D 53656C66 2D536967 6E65642D 43657274
>   69666963 6174652D 32373636 34343330 3938301E 170D3039 30383038 30313537
>   35305A17 0D323030 31303130 30303030 305A3031 312F302D 06035504 03132649
>   4F532D53 656C662D 5369676E 65642D43 65727469 66696361 74652D32 37363634
>   34333039 3830819F 300D0609 2A864886 F70D0101 01050003 818D0030 81890281
>   8100F024 7897883D 2917DD31 A92AFC92 5FF90B0B 87C59186 1DA717E6 7DC7113F
>   78FB9546 891FAF14 94296F95 1A269F0A 1945EF5D 02501E85 84CF230A 1945FFD8
>   6A0952FD 5B97A0B3 CF83D474 59D24A1E 3CDBF52F 1245C023 0905CD43 DDCFAE77
>   56347A58 B91E076E 7C6E39B8 212C15D1 5E6AE9F7 B75E36E5 2EA5EBF6 20888E4C
>   A78F0203 010001A3 76307430 0F060355 1D130101 FF040530 030101FF 30210603
>   551D1104 1A301882 16436973 636F3238 30312E64 61746173 632E6C6F 63616C30
>   1F060355 1D230418 30168014 41650862 0AD93B9A 9639B46B 339E916B A2762CAB
>   301D0603 551D0E04 16041441 6508620A D93B9A96 39B46B33 9E916BA2 762CAB30
>   0D06092A 864886F7 0D010104 05000381 8100A84C 200FC75E 17F51DB1 0F14F173
>   364AE98E 886DE050 8FB015C9 FD057C62 2E01286A 0216D04E 08DB02F8 B52B6BB1
>   2A2710E4 73A8876A 1570E4A9 75A77B33 59B244C8 47AD12C8 7A3441A5 EEE48002
>   20FA0B1F A0B0803D 4FF86CD2 4D69B649 7DD6D151 0EC8A3CF E6B278F5 DC40598C
>   00E4DDC2 58CAD837 9D4C1738 9CA1F850 6F2C
>         quit
> !
> !
> username ******** privilege 15 secret 5 *********
> archive
>  log config
>   hidekeys
> !
> !
> crypto isakmp policy 20
>  encr aes 192
>  authentication pre-share
>  group 2
> crypto isakmp key Recoil90 address 0.0.0.0 0.0.0.0
> crypto isakmp fragmentation
> !
> crypto isakmp client configuration group datasc
>  key Recoil90
>  dns 10.1.80.2 10.1.80.3
>  domain datasc.local
>  pool REMOTEVPNPOOL
>  acl 150
> crypto isakmp profile ezvpn
>    match identity group datasc
>    client authentication list ezvpnuserauth
>    isakmp authorization list ezvpngroupauth
>    client configuration address respond
> !
> !
> crypto ipsec transform-set ezvpntransform esp-aes esp-sha-hmac
> !
> crypto dynamic-map dynmap 20
>  set transform-set ezvpntransform
>  set isakmp-profile ezvpn
>  reverse-route
> !
> !
> crypto map dynmap 1 ipsec-isakmp dynamic dynmap
> !
> !
> crypto key pubkey-chain rsa
>  named-key realm-cisco.pub
>   key-string
>    30820122 300D0609 2A864886 F70D0101 01050003 82010F00 3082010A 02820101
>    00C19E93 A8AF124A D6CC7A24 5097A975 206BE3A2 06FBA13F 6F12CB5B 4E441F16
>    17E630D5 C02AC252 912BE27F 37FDD9C8 11FC7AF7 DCDD81D9 43CDABC3 6007D128
>    B199ABCB D34ED0F9 085FADC1 359C189E F30AF10A C0EFB624 7E0764BF 3E53053E
>    5B2146A9 D7A5EDE3 0298AF03 DED7A5B8 9479039D 20F30663 9AC64B93 C0112A35
>    FE3F0C87 89BCB7BB 994AE74C FA9E481D F65875D6 85EAF974 6D9CC8E3 F0B08B85
>    50437722 FFBE85B9 5E4189FF CC189CB9 69C46F9C A84DFBA5 7A0AF99E AD768C36
>    006CF498 079F88F8 A3B3FB1F 9FB7B3CB 5539E1D1 9693CCBB 551F78D2 892356AE
>    2F56D826 8918EF3C 80CA4F4D 87BFCA3B BFF668E9 689782A5 CF31CB6E B4B094D3
>    F3020301 0001
>   quit
> !
> !
> !
> !
> !
> !
> interface FastEthernet0/0
>  bandwidth 16000
>  ip address dhcp
>  ip access-group internet in
>  no ip redirects
>  no ip unreachables
>  no ip proxy-arp
>  ip nbar protocol-discovery
>  ip flow ingress
>  ip flow egress
>  ip nat outside
>  ip inspect CBAC out
>  ip virtual-reassembly
>  speed 100
>  full-duplex
>  crypto map dynmap
> !
> interface FastEthernet0/1
>  ip address 10.1.200.1 255.255.255.252
>  ip nbar protocol-discovery
>  ip flow ingress
>  ip flow egress
>  ip nat inside
>  ip virtual-reassembly
>  duplex auto
>  speed auto
>  h323-gateway voip bind srcaddr 10.1.200.1
> !
> interface FastEthernet0/1/0
>  description ConnectionDell2900DMZ
>  switchport access vlan 150
>  spanning-tree portfast
> !
> interface FastEthernet0/1/1
>  switchport access vlan 150
>  spanning-tree portfast
> !
> interface FastEthernet0/1/2
> !
> interface FastEthernet0/1/3
> !
> interface Vlan1
>  no ip address
> !
> interface Vlan150
>  ip address 10.1.150.1 255.255.255.0
>  ip nbar protocol-discovery
>  ip flow ingress
>  ip flow egress
>  ip nat inside
>  ip virtual-reassembly
> !
> router eigrp 1
>  network 10.0.0.0
>  network 172.16.0.0
>  no auto-summary
> !
> ip local pool REMOTEVPNPOOL 10.250.1.10 10.250.1.150
> ip forward-protocol nd
> ip route 0.0.0.0 0.0.0.0 66.56.50.1
> ip route 96.57.19.26 255.255.255.255 66.56.50.1
> ip http server
> ip http authentication local
> ip http secure-server
> !
> ip flow-cache timeout active 1
> ip flow-export version 5
> ip flow-export destination 10.1.80.5 9996
> !
> ip nat inside source list NATNETWORKS interface FastEthernet0/0 overload
> ip nat inside source static tcp 10.1.150.150 80 interface FastEthernet0/0
> 8080
> !
> ip access-list extended NATNETWORKS
>  permit ip 10.1.0.0 0.0.255.255 any
> ip access-list extended internet
>  permit udp any any eq isakmp
>  permit tcp any any eq 22
>  permit udp any eq bootps any eq bootpc
>  permit icmp any any echo
>  permit icmp any any echo-reply
>  permit icmp any any traceroute
>  permit gre any any
>  permit esp any any
>  permit tcp any any eq 5001
>  permit tcp any any eq www
>  permit tcp any any eq 8080
>  permit udp any any eq non500-isakmp
> !
> logging trap errors
> logging source-interface FastEthernet0/1
> logging 10.1.80.5
> access-list 150 permit ip 10.1.0.0 0.0.255.255 any
> !
> !
> !
> !
> !
> control-plane
> !
> !
> !
> voice-port 0/0/0
>  trunk-group FXOPORTS
>  echo-cancel coverage 32
>  timeouts interdigit 7
>  connection plar opx 102
>  description 770-892-5514
>  caller-id enable
> !
> voice-port 0/0/1
>  trunk-group FXOPORTS
>  echo-cancel coverage 32
>  timeouts interdigit 7
>  connection plar opx 102
>  caller-id enable
> !
> !
> no mgcp timer receive-rtcp
> mgcp fax t38 ecm
> mgcp behavior g729-variants static-pt
> !
> !
> dspfarm profile 1 transcode
>  associate application SCCP
> !
> !
> dial-peer voice 501 pots
>  trunkgroup FXOPORTS
>  description Services
>  destination-pattern [2-8]11
>  progress_ind setup enable 3
>  progress_ind progress enable 8
>  forward-digits all
> !
> dial-peer voice 511 pots
>  trunkgroup FXOPORTS
>  description local seven digit
>  destination-pattern [2-9]......
>  progress_ind setup enable 3
>  progress_ind progress enable 8
>  forward-digits all
> !
> dial-peer voice 521 pots
>  trunkgroup FXOPORTS
>  description local ten digit
>  destination-pattern 770.......
>  progress_ind setup enable 3
>  progress_ind progress enable 8
>  forward-digits all
> !
> dial-peer voice 531 pots
>  trunkgroup FXOPORTS
>  description long distance
>  destination-pattern [2-9]........
>  progress_ind setup enable 3
>  progress_ind progress enable 8
>  forward-digits all
> !
> dial-peer voice 571 pots
>  trunkgroup FXOPORTS
>  description long distance with one
>  destination-pattern 1[2-9]........
>  progress_ind setup enable 3
>  progress_ind progress enable 8
>  forward-digits all
> !
> dial-peer voice 541 pots
>  trunkgroup FXOPORTS
>  description toll free distance
>  destination-pattern 1[800,866,877,888].......
>  progress_ind setup enable 3
>  progress_ind progress enable 8
>  forward-digits all
> !
> dial-peer voice 551 pots
>  trunkgroup FXOPORTS
>  description premium distance
>  destination-pattern 1[900,976].......
>  progress_ind setup enable 3
>  progress_ind progress enable 8
>  forward-digits all
> !
> dial-peer voice 561 pots
>  trunkgroup FXOPORTS
>  description international
>  destination-pattern 011...........
>  progress_ind setup enable 3
>  progress_ind progress enable 8
>  forward-digits all
> !
> dial-peer voice 911 pots
>  trunkgroup FXOPORTS
>  description 911 Call
>  destination-pattern 911
>  forward-digits all
> !
> dial-peer voice 1000 pots
>  description incoming Call
>  preference 1
>  incoming called-number 7708925414
>  port 0/0/0
> !
> dial-peer voice 1001 pots
>  description incoming Call backup
>  preference 2
>  incoming called-number 7708925413
>  port 0/0/1
> !
> dial-peer voice 100 voip
>  description 1xx extension to PUBLISHER
>  preference 1
>  destination-pattern 1..
>  progress_ind setup enable 3
>  progress_ind progress enable 8
>  voice-class h323 50
>  session target ipv4:10.1.80.6
>  dtmf-relay h245-alphanumeric
>  codec g711ulaw
>  no vad
> !
> dial-peer voice 101 voip
>  description 1xx extension to subscriber
>  preference 2
>  destination-pattern 1..
>  progress_ind setup enable 3
>  progress_ind progress enable 8
>  voice-class h323 50
>  session target ipv4:10.1.80.7
>  dtmf-relay h245-alphanumeric
>  codec g711ulaw
>  no vad
> !
> !
> !
> !
> gatekeeper
>  shutdown
> !
> !
> line con 0
> line aux 0
> line vty 0 4
>  privilege level 15
>  transport input ssh
> line vty 5 15
>  privilege level 15
>  transport input ssh
> !
> scheduler allocate 20000 1000
> end
> Cisco2801#
> Cisco2801#
> Cisco2801#
>
> On Wed, Sep 16, 2009 at 12:14 PM, Dane Newman <dane.newman at gmail.com>wrote:
>
>> I have the same issue
>>
>> When I call comes into my fxo port I get unknown number  Can anyone assist
>> with this?  Im using CUCM 7.0 and a 2801 h323 gateway
>>
>>
>> voice-port 0/0/0
>>  trunk-group FXOPORTS
>>  echo-cancel coverage 32
>>  timeouts interdigit 7
>>  connection plar opx 500
>>  description ******
>>  caller-id enable
>>
>>   On Tue, Sep 15, 2009 at 4:33 PM, Ratko Dodevski <rade239 at gmail.com>wrote:
>>
>>>  I forgot to mention that i use H323 gateway and CUCM 7
>>>
>>>
>>>
>>>
>>> On Tue, Sep 15, 2009 at 9:31 PM, Ratko Dodevski <rade239 at gmail.com>wrote:
>>>
>>>> Hi, does anyone had already this kind of problem. A have my GSM adapter
>>>> on plugged into VIC2-2FXO card and all incoming calls are representing as
>>>> External Dial Unknown Number. Here is my voice-port config and dial-peer.
>>>> Also, is there a way to use FXS ports instead?
>>>>
>>>> voice-port 0/3/0
>>>>  supervisory disconnect anytone
>>>>  cptone DE
>>>>  timeouts call-disconnect 0
>>>>  timeouts ringing 30
>>>>  timeouts wait-release 5
>>>>  connection plar 101
>>>>  impedance complex2
>>>>  bearer-cap Speech
>>>>  caller-id alerting dsp-pre-allocate
>>>>
>>>> dial-peer voice 70 pots
>>>>  destination-pattern 070......
>>>>  direct-inward-dial
>>>>  port 0/3/0
>>>>  prefix 070
>>>>
>>>> Any help would be appreciated.
>>>>
>>>> Regards
>>>>
>>>> --
>>>> Ratko
>>>>
>>>
>>>
>>>
>>> --
>>> Ratko
>>>
>>> _______________________________________________
>>> cisco-voip mailing list
>>> cisco-voip at puck.nether.net
>>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>>
>>>
>>
>


-- 
Ratko
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090916/bd888c77/attachment.html>


More information about the cisco-voip mailing list