[cisco-voip] CallerIP trough FXO port
Nick Matthews
matthnick at gmail.com
Wed Sep 16 20:15:16 EDT 2009
That should be fine. I'm not quite sure what the problem is from the
debugs, but you can try checking the polarity of the line (T&R),
changing the wire out, or changing the rings before FSK:
callerd-id alerting ring 1-4
-nick
On Wed, Sep 16, 2009 at 7:30 PM, Dane Newman <dane.newman at gmail.com> wrote:
> Im using flash:c2801-adventerprisek9_ivs-mz.124-24.T1.bin
>
> Hm are you able to recommend one that's known to be stable?
>
> Dane
>
> On Wed, Sep 16, 2009 at 7:27 PM, Nick Matthews <matthnick at gmail.com> wrote:
>>
>> There were a few caller ID bugs - have you tried a different version of
>> IOS?
>>
>> -nick
>>
>> On Wed, Sep 16, 2009 at 6:54 PM, Dane Newman <dane.newman at gmail.com>
>> wrote:
>> > So odd when I plug a regular phone in I get caller id...this is with
>> > comcast
>> > voice
>> >
>> > On Wed, Sep 16, 2009 at 6:46 PM, Dane Newman <dane.newman at gmail.com>
>> > wrote:
>> >>
>> >> Im getting this on a debug
>> >>
>> >> Cisco2801(config)#logging moni 7
>> >> Cisco2801(config)#exit
>> >> Cisco2801#
>> >> *Sep 16 22:45:08: %SYS-5-CONFIG_I: Configured from console by dnewman
>> >> on
>> >> vty0 (10.1.150.125)
>> >> Cisco2801#
>> >> Cisco2801#
>> >> *Sep 16 22:45:15.009: htsp_process_event: [0/0/0, FXOLS_ONHOOK,
>> >> E_DSP_SIG_0000]fxols_onhook_ringing
>> >> *Sep 16 22:45:15.009: TGRM: reg_invoke_tgrm_call_update(0, 0, 0, 65535,
>> >> 1,
>> >> TGRM_CALL_PENDING, TGRM_CALL_VOICE, TGRM_DIRECTION_IN)
>> >> *Sep 16 22:45:15.009: htsp_timer - 125 msec
>> >> *Sep 16 22:45:15.137: htsp_process_event: [0/0/0, FXOLS_WAIT_RING_MIN,
>> >> E_HTSP_EVENT_TIMER]fxols_wait_ring_min_timer
>> >> *Sep 16 22:45:15.137: htsp_timer - 10000 msec
>> >> *Sep 16 22:45:15.137: htsp_timer3 - 5600 msec
>> >> *Sep 16 22:45:15.137: [0/0/0] htsp_start_caller_id_rx:BELLCORE
>> >> *Sep 16 22:45:15.137:
>> >> //-1/313233343930/DSM:(0/0/0):-1/dsp_stream_mgr_create: .
>> >> *Sep 16 22:45:15.137:
>> >> //-1/313233343930/DSM:(0/0/0):-1/set_echo_canceller_data: echo_cancel:
>> >> 0
>> >> *Sep 16 22:45:15.137:
>> >> //-1/313233343930/DSM:(0/0/0):-1/set_echo_canceller_data: echo_flags:
>> >> 38,
>> >> echo_len: 256
>> >> *Sep 16 22:45:15.137: htsp_start_caller_id_rx create dsp_stream_manager
>> >> *Sep 16 22:45:15.137:
>> >> //-1/313233343930/DSM:(0/0/0):-1/dsp_stream_mgr_set_dsp_allocated: .
>> >> *Sep 16 22:45:15.137:
>> >> //-1/313233343930/DSM:(0/0/0):-1/dsp_stream_mgr_implement_feature:
>> >> *Sep 16 22:45:15.141: dsp_stream_mgr_implement_feature: feature id = 7
>> >> *Sep 16 22:45:15.145:
>> >> //-1/313233343930/DSM:(0/0/0):-1/dsmp_dsmapi_reserve_resource_cb: .
>> >> *Sep 16 22:45:15.145: [0/0/0] htsp_dsm_create_success returns 1
>> >> *Sep 16 22:45:17.077: htsp_process_event: [0/0/0, FXOLS_RINGING,
>> >> E_DSP_SIG_0100]
>> >> *Sep 16 22:45:17.077: fxols_ringing_not
>> >> *Sep 16 22:45:17.077: htsp_timer_stop
>> >> *Sep 16 22:45:17.077: htsp_timer - 10000 msec
>> >> *Sep 16 22:45:20.737: htsp_process_event: [0/0/0, FXOLS_RINGING,
>> >> E_HTSP_EVENT_TIMER3]fxols_snoop_clid_stop
>> >> *Sep 16 22:45:20.737: htsp_timer_stop3
>> >> *Sep 16 22:45:21.009: htsp_process_event: [0/0/0, FXOLS_RINGING,
>> >> E_DSP_SIG_0000]
>> >> *Sep 16 22:45:23.077: htsp_process_event: [0/0/0, FXOLS_RINGING,
>> >> E_DSP_SIG_0100]
>> >> *Sep 16 22:45:23.077: fxols_ringing_not
>> >> *Sep 16 22:45:23.077: htsp_timer_stop
>> >> *Sep 16 22:45:23.077: htsp_timer_stop3
>> >> *Sep 16 22:45:23.077:
>> >> //-1/313233343930/DSM:(0/0/0):-1/dsp_stream_mgr_destroy: .
>> >> *Sep 16 22:45:23.077:
>> >> //-1/313233343930/DSM:(0/0/0):-1/dsm_delete_all_streams: .
>> >> *Sep 16 22:45:23.081:
>> >>
>> >> //-1/313233343930/DSM:(0/0/0):-1/dsmapi_accept_modem_passthrough_session: :
>> >> dmgr: 68F25A64, active sessions 0, max sessions: 16 rejected sessions
>> >> till
>> >> now: 0
>> >> *Sep 16 22:45:23.081: [0/0/0] htsp_stop_caller_id_rx. message length
>> >> 0htsp_setup_ind
>> >> *Sep 16 22:45:23.081: [0/0/0] get_fxo_caller_id:Caller ID receive
>> >> failed.
>> >> parseCallerIDString:no data.
>> >> *Sep 16 22:45:23.081: [0/0/0] get_local_station_id calling num= calling
>> >> name= calling time=09/16 22:45 orig called=
>> >> *Sep 16 22:45:23.081: TGRM: reg_invoke_tgrm_accept_call(1,
>> >> TGRM_CALL_VOICE, TGRM_DIRECTION_IN, 0, 0, 0, 65535)
>> >> *Sep 16 22:45:23.081: TGRM: Calling vtsp_tsp_call_setup_ind().
>> >> *Sep 16 22:45:23.097: htsp_process_event: [0/0/0, FXOLS_WAIT_SETUP_ACK,
>> >> E_HTSP_SETUP_ACK]
>> >> *Sep 16 22:45:23.097: fxols_wait_setup_ack:
>> >> *Sep 16 22:45:23.097: htsp_timer - 6000 msec
>> >> *Sep 16 22:45:23.125: htsp_process_event: [0/0/0, FXOLS_PROCEEDING,
>> >> E_HTSP_PROCEEDING]fxols_offhook_proc
>> >> *Sep 16 22:45:23.129: flex_dsprm_close_cleanup
>> >> *Sep 16 22:45:23.129:
>> >> //-1/313233343930/DSM:(0/0/0):-1/dsmp_dsmapi_reserve_resource_cb: .
>> >> *Sep 16 22:45:23.129: [0/0/0] htsp_dsm_close_donehtsp_alert_notify
>> >> *Sep 16 22:45:23.157: htsp_process_event: [0/0/0, FXOLS_PROCEEDING,
>> >>
>> >> E_HTSP_ALERT]fxols_offhook_alerthtsp_call_service_msghtsp_call_service_msg
>> >> not EFXS (2)
>> >> *Sep 16 22:45:27.009: htsp_process_event: [0/0/0, FXOLS_PROCEEDING,
>> >> E_DSP_SIG_0000]fxols_proceed_ring
>> >> *Sep 16 22:45:27.009: htsp_timer_stop
>> >> *Sep 16 22:45:27.009: htsp_timer_stop2
>> >> *Sep 16 22:45:29.077: htsp_process_event: [0/0/0, FXOLS_PROCEEDING,
>> >> E_DSP_SIG_0100]fxols_proceed_clear
>> >> *Sep 16 22:45:29.077: htsp_timer_stop2
>> >> *Sep 16 22:45:29.077: htsp_timer - 6000 msec
>> >> *Sep 16 22:45:33.009: htsp_process_event: [0/0/0, FXOLS_PROCEEDING,
>> >> E_DSP_SIG_0000]fxols_proceed_ring
>> >> *Sep 16 22:45:33.009: htsp_timer_stop
>> >> *Sep 16 22:45:33.009: htsp_timer_stop2
>> >> *Sep 16 22:45:35.077: htsp_process_event: [0/0/0, FXOLS_PROCEEDING,
>> >> E_DSP_SIG_0100]fxols_proceed_clear
>> >> *Sep 16 22:45:35.077: htsp_timer_stop2
>> >> *Sep 16 22:45:35.077: htsp_timer - 6000 msec
>> >>
>> >> On Wed, Sep 16, 2009 at 6:29 PM, Dane Newman <dane.newman at gmail.com>
>> >> wrote:
>> >>>
>> >>> Hmm I only get this
>> >>>
>> >>> Cisco2801(config-voiceport)#caller-id ?
>> >>> alerting Define caller id alerting method
>> >>> enable Enable caller id on this port
>> >>> Cisco2801(config-voiceport)#caller-id al ?
>> >>> ring during ring
>> >>> Cisco2801(config-voiceport)#caller-id al ring ?
>> >>> <1-4> number of ring on cycles
>> >>> Cisco2801(config-voiceport)#caller-id al ring 4 ?
>> >>> <cr>
>> >>> Cisco2801(config-voiceport)#caller-id al ring 4
>> >>>
>> >>> I tried every setting but still no caller id it shows up as unknow
>> >>> what
>> >>> do I have to debug to figure this out or anyone have any ideas
>> >>>
>> >>> On Wed, Sep 16, 2009 at 4:27 PM, Ratko Dodevski <rade239 at gmail.com>
>> >>> wrote:
>> >>>>
>> >>>> sorry.. it's caller-id alerting pre-ring....
>> >>>> regards
>> >>>>
>> >>>> On Wed, Sep 16, 2009 at 10:25 PM, Ratko Dodevski <rade239 at gmail.com>
>> >>>> wrote:
>> >>>>>
>> >>>>> GSM adapter is device in whic you put SIM card and I use it for my
>> >>>>> mobile calls to go trough that SIM card cos it's cheaper. Also I
>> >>>>> forgot to
>> >>>>> mention that you might need to set caller-id alerting parameters.
>> >>>>> You can
>> >>>>> try several. pre-dial, during dial... pre dial worked for me.
>> >>>>> Ratko
>> >>>>>
>> >>>>> On Wed, Sep 16, 2009 at 10:01 PM, Dane Newman
>> >>>>> <dane.newman at gmail.com>
>> >>>>> wrote:
>> >>>>>>
>> >>>>>> Thanks man forgive me for asking but what is gsm I connected my fxo
>> >>>>>> into my comcast cable modem caller I'd works with a regular phone
>> >>>>>> connected
>> >>>>>> in
>> >>>>>>
>> >>>>>> Sent from my iPhone
>> >>>>>> On Sep 16, 2009, at 3:37 PM, Ratko Dodevski <rade239 at gmail.com>
>> >>>>>> wrote:
>> >>>>>>
>> >>>>>> Hi Dane,
>> >>>>>> I solved my problem... It was the GSM adapter :))) I plugged phone
>> >>>>>> with Caller Id and find out that GSM doesn't provide CLID. So I
>> >>>>>> connected to
>> >>>>>> the adapter and set it to send CLID.
>> >>>>>>
>> >>>>>> Best Regards
>> >>>>>> Ratko
>> >>>>>> On Wed, Sep 16, 2009 at 6:25 PM, Dane Newman
>> >>>>>> <dane.newman at gmail.com>
>> >>>>>> wrote:
>> >>>>>>>
>> >>>>>>> My full router config is as follows
>> >>>>>>>
>> >>>>>>> Cisco2801#sh run
>> >>>>>>> Building configuration...
>> >>>>>>> Current configuration : 9848 bytes
>> >>>>>>> !
>> >>>>>>> version 12.4
>> >>>>>>> service timestamps debug datetime msec
>> >>>>>>> service timestamps log datetime localtime
>> >>>>>>> service password-encryption
>> >>>>>>> !
>> >>>>>>> hostname Cisco2801
>> >>>>>>> !
>> >>>>>>> boot-start-marker
>> >>>>>>> boot-end-marker
>> >>>>>>> !
>> >>>>>>> logging message-counter syslog
>> >>>>>>> no logging buffered
>> >>>>>>> no logging monitor
>> >>>>>>> enable secret 5 $1$Sz.G$hunXhcScXrQkHmAllKj4.0
>> >>>>>>> !
>> >>>>>>> aaa new-model
>> >>>>>>> !
>> >>>>>>> !
>> >>>>>>> aaa authentication login default local
>> >>>>>>> aaa authentication login ezvpnuserauth local
>> >>>>>>> aaa authorization exec default local
>> >>>>>>> aaa authorization network default local
>> >>>>>>> aaa authorization network ezvpngroupauth local
>> >>>>>>> !
>> >>>>>>> !
>> >>>>>>> aaa session-id common
>> >>>>>>> errdisable recovery cause bpduguard
>> >>>>>>> errdisable recovery interval 400
>> >>>>>>> dot11 syslog
>> >>>>>>> ip source-route
>> >>>>>>> !
>> >>>>>>> !
>> >>>>>>> !
>> >>>>>>> !
>> >>>>>>> ip cef
>> >>>>>>> no ip domain lookup
>> >>>>>>> ip domain name datasc.local
>> >>>>>>> ip inspect udp idle-time 1800
>> >>>>>>> ip inspect name CBAC tcp
>> >>>>>>> ip inspect name CBAC udp
>> >>>>>>> ip inspect name CBAC icmp
>> >>>>>>> no ipv6 cef
>> >>>>>>> ntp server 129.6.15.28
>> >>>>>>> !
>> >>>>>>> multilink bundle-name authenticated
>> >>>>>>> !
>> >>>>>>> !
>> >>>>>>> !
>> >>>>>>> !
>> >>>>>>> !
>> >>>>>>> !
>> >>>>>>> trunk group FXOPORTS
>> >>>>>>> !
>> >>>>>>> !
>> >>>>>>> !
>> >>>>>>> voice service pots
>> >>>>>>> !
>> >>>>>>> voice service voip
>> >>>>>>> fax protocol cisco
>> >>>>>>> h323
>> >>>>>>> no h225 timeout keepalive
>> >>>>>>> !
>> >>>>>>> !
>> >>>>>>> !
>> >>>>>>> !
>> >>>>>>> !
>> >>>>>>> !
>> >>>>>>> voice class h323 50
>> >>>>>>> h225 timeout tcp establish 3
>> >>>>>>> !
>> >>>>>>> !
>> >>>>>>> !
>> >>>>>>> !
>> >>>>>>> !
>> >>>>>>> !
>> >>>>>>> !
>> >>>>>>> !
>> >>>>>>> !
>> >>>>>>> !
>> >>>>>>> !
>> >>>>>>> voice-card 0
>> >>>>>>> dsp services dspfarm
>> >>>>>>> !
>> >>>>>>> !
>> >>>>>>> application
>> >>>>>>> global
>> >>>>>>> service alternate default
>> >>>>>>> !
>> >>>>>>> !
>> >>>>>>> !
>> >>>>>>> crypto pki trustpoint TP-self-signed-2766443098
>> >>>>>>> enrollment selfsigned
>> >>>>>>> subject-name cn=IOS-Self-Signed-Certificate-2766443098
>> >>>>>>> revocation-check none
>> >>>>>>> rsakeypair TP-self-signed-2766443098
>> >>>>>>> !
>> >>>>>>> !
>> >>>>>>> crypto pki certificate chain TP-self-signed-2766443098
>> >>>>>>> certificate self-signed 01
>> >>>>>>> 3082024E 308201B7 A0030201 02020101 300D0609 2A864886 F70D0101
>> >>>>>>> 04050030
>> >>>>>>> 31312F30 2D060355 04031326 494F532D 53656C66 2D536967 6E65642D
>> >>>>>>> 43657274
>> >>>>>>> 69666963 6174652D 32373636 34343330 3938301E 170D3039 30383038
>> >>>>>>> 30313537
>> >>>>>>> 35305A17 0D323030 31303130 30303030 305A3031 312F302D 06035504
>> >>>>>>> 03132649
>> >>>>>>> 4F532D53 656C662D 5369676E 65642D43 65727469 66696361 74652D32
>> >>>>>>> 37363634
>> >>>>>>> 34333039 3830819F 300D0609 2A864886 F70D0101 01050003 818D0030
>> >>>>>>> 81890281
>> >>>>>>> 8100F024 7897883D 2917DD31 A92AFC92 5FF90B0B 87C59186 1DA717E6
>> >>>>>>> 7DC7113F
>> >>>>>>> 78FB9546 891FAF14 94296F95 1A269F0A 1945EF5D 02501E85 84CF230A
>> >>>>>>> 1945FFD8
>> >>>>>>> 6A0952FD 5B97A0B3 CF83D474 59D24A1E 3CDBF52F 1245C023 0905CD43
>> >>>>>>> DDCFAE77
>> >>>>>>> 56347A58 B91E076E 7C6E39B8 212C15D1 5E6AE9F7 B75E36E5 2EA5EBF6
>> >>>>>>> 20888E4C
>> >>>>>>> A78F0203 010001A3 76307430 0F060355 1D130101 FF040530 030101FF
>> >>>>>>> 30210603
>> >>>>>>> 551D1104 1A301882 16436973 636F3238 30312E64 61746173 632E6C6F
>> >>>>>>> 63616C30
>> >>>>>>> 1F060355 1D230418 30168014 41650862 0AD93B9A 9639B46B 339E916B
>> >>>>>>> A2762CAB
>> >>>>>>> 301D0603 551D0E04 16041441 6508620A D93B9A96 39B46B33 9E916BA2
>> >>>>>>> 762CAB30
>> >>>>>>> 0D06092A 864886F7 0D010104 05000381 8100A84C 200FC75E 17F51DB1
>> >>>>>>> 0F14F173
>> >>>>>>> 364AE98E 886DE050 8FB015C9 FD057C62 2E01286A 0216D04E 08DB02F8
>> >>>>>>> B52B6BB1
>> >>>>>>> 2A2710E4 73A8876A 1570E4A9 75A77B33 59B244C8 47AD12C8 7A3441A5
>> >>>>>>> EEE48002
>> >>>>>>> 20FA0B1F A0B0803D 4FF86CD2 4D69B649 7DD6D151 0EC8A3CF E6B278F5
>> >>>>>>> DC40598C
>> >>>>>>> 00E4DDC2 58CAD837 9D4C1738 9CA1F850 6F2C
>> >>>>>>> quit
>> >>>>>>> !
>> >>>>>>> !
>> >>>>>>> username ******** privilege 15 secret 5 *********
>> >>>>>>> archive
>> >>>>>>> log config
>> >>>>>>> hidekeys
>> >>>>>>> !
>> >>>>>>> !
>> >>>>>>> crypto isakmp policy 20
>> >>>>>>> encr aes 192
>> >>>>>>> authentication pre-share
>> >>>>>>> group 2
>> >>>>>>> crypto isakmp key Recoil90 address 0.0.0.0 0.0.0.0
>> >>>>>>> crypto isakmp fragmentation
>> >>>>>>> !
>> >>>>>>> crypto isakmp client configuration group datasc
>> >>>>>>> key Recoil90
>> >>>>>>> dns 10.1.80.2 10.1.80.3
>> >>>>>>> domain datasc.local
>> >>>>>>> pool REMOTEVPNPOOL
>> >>>>>>> acl 150
>> >>>>>>> crypto isakmp profile ezvpn
>> >>>>>>> match identity group datasc
>> >>>>>>> client authentication list ezvpnuserauth
>> >>>>>>> isakmp authorization list ezvpngroupauth
>> >>>>>>> client configuration address respond
>> >>>>>>> !
>> >>>>>>> !
>> >>>>>>> crypto ipsec transform-set ezvpntransform esp-aes esp-sha-hmac
>> >>>>>>> !
>> >>>>>>> crypto dynamic-map dynmap 20
>> >>>>>>> set transform-set ezvpntransform
>> >>>>>>> set isakmp-profile ezvpn
>> >>>>>>> reverse-route
>> >>>>>>> !
>> >>>>>>> !
>> >>>>>>> crypto map dynmap 1 ipsec-isakmp dynamic dynmap
>> >>>>>>> !
>> >>>>>>> !
>> >>>>>>> crypto key pubkey-chain rsa
>> >>>>>>> named-key realm-cisco.pub
>> >>>>>>> key-string
>> >>>>>>> 30820122 300D0609 2A864886 F70D0101 01050003 82010F00 3082010A
>> >>>>>>> 02820101
>> >>>>>>> 00C19E93 A8AF124A D6CC7A24 5097A975 206BE3A2 06FBA13F 6F12CB5B
>> >>>>>>> 4E441F16
>> >>>>>>> 17E630D5 C02AC252 912BE27F 37FDD9C8 11FC7AF7 DCDD81D9 43CDABC3
>> >>>>>>> 6007D128
>> >>>>>>> B199ABCB D34ED0F9 085FADC1 359C189E F30AF10A C0EFB624 7E0764BF
>> >>>>>>> 3E53053E
>> >>>>>>> 5B2146A9 D7A5EDE3 0298AF03 DED7A5B8 9479039D 20F30663 9AC64B93
>> >>>>>>> C0112A35
>> >>>>>>> FE3F0C87 89BCB7BB 994AE74C FA9E481D F65875D6 85EAF974 6D9CC8E3
>> >>>>>>> F0B08B85
>> >>>>>>> 50437722 FFBE85B9 5E4189FF CC189CB9 69C46F9C A84DFBA5 7A0AF99E
>> >>>>>>> AD768C36
>> >>>>>>> 006CF498 079F88F8 A3B3FB1F 9FB7B3CB 5539E1D1 9693CCBB 551F78D2
>> >>>>>>> 892356AE
>> >>>>>>> 2F56D826 8918EF3C 80CA4F4D 87BFCA3B BFF668E9 689782A5 CF31CB6E
>> >>>>>>> B4B094D3
>> >>>>>>> F3020301 0001
>> >>>>>>> quit
>> >>>>>>> !
>> >>>>>>> !
>> >>>>>>> !
>> >>>>>>> !
>> >>>>>>> !
>> >>>>>>> !
>> >>>>>>> interface FastEthernet0/0
>> >>>>>>> bandwidth 16000
>> >>>>>>> ip address dhcp
>> >>>>>>> ip access-group internet in
>> >>>>>>> no ip redirects
>> >>>>>>> no ip unreachables
>> >>>>>>> no ip proxy-arp
>> >>>>>>> ip nbar protocol-discovery
>> >>>>>>> ip flow ingress
>> >>>>>>> ip flow egress
>> >>>>>>> ip nat outside
>> >>>>>>> ip inspect CBAC out
>> >>>>>>> ip virtual-reassembly
>> >>>>>>> speed 100
>> >>>>>>> full-duplex
>> >>>>>>> crypto map dynmap
>> >>>>>>> !
>> >>>>>>> interface FastEthernet0/1
>> >>>>>>> ip address 10.1.200.1 255.255.255.252
>> >>>>>>> ip nbar protocol-discovery
>> >>>>>>> ip flow ingress
>> >>>>>>> ip flow egress
>> >>>>>>> ip nat inside
>> >>>>>>> ip virtual-reassembly
>> >>>>>>> duplex auto
>> >>>>>>> speed auto
>> >>>>>>> h323-gateway voip bind srcaddr 10.1.200.1
>> >>>>>>> !
>> >>>>>>> interface FastEthernet0/1/0
>> >>>>>>> description ConnectionDell2900DMZ
>> >>>>>>> switchport access vlan 150
>> >>>>>>> spanning-tree portfast
>> >>>>>>> !
>> >>>>>>> interface FastEthernet0/1/1
>> >>>>>>> switchport access vlan 150
>> >>>>>>> spanning-tree portfast
>> >>>>>>> !
>> >>>>>>> interface FastEthernet0/1/2
>> >>>>>>> !
>> >>>>>>> interface FastEthernet0/1/3
>> >>>>>>> !
>> >>>>>>> interface Vlan1
>> >>>>>>> no ip address
>> >>>>>>> !
>> >>>>>>> interface Vlan150
>> >>>>>>> ip address 10.1.150.1 255.255.255.0
>> >>>>>>> ip nbar protocol-discovery
>> >>>>>>> ip flow ingress
>> >>>>>>> ip flow egress
>> >>>>>>> ip nat inside
>> >>>>>>> ip virtual-reassembly
>> >>>>>>> !
>> >>>>>>> router eigrp 1
>> >>>>>>> network 10.0.0.0
>> >>>>>>> network 172.16.0.0
>> >>>>>>> no auto-summary
>> >>>>>>> !
>> >>>>>>> ip local pool REMOTEVPNPOOL 10.250.1.10 10.250.1.150
>> >>>>>>> ip forward-protocol nd
>> >>>>>>> ip route 0.0.0.0 0.0.0.0 66.56.50.1
>> >>>>>>> ip route 96.57.19.26 255.255.255.255 66.56.50.1
>> >>>>>>> ip http server
>> >>>>>>> ip http authentication local
>> >>>>>>> ip http secure-server
>> >>>>>>> !
>> >>>>>>> ip flow-cache timeout active 1
>> >>>>>>> ip flow-export version 5
>> >>>>>>> ip flow-export destination 10.1.80.5 9996
>> >>>>>>> !
>> >>>>>>> ip nat inside source list NATNETWORKS interface FastEthernet0/0
>> >>>>>>> overload
>> >>>>>>> ip nat inside source static tcp 10.1.150.150 80 interface
>> >>>>>>> FastEthernet0/0 8080
>> >>>>>>> !
>> >>>>>>> ip access-list extended NATNETWORKS
>> >>>>>>> permit ip 10.1.0.0 0.0.255.255 any
>> >>>>>>> ip access-list extended internet
>> >>>>>>> permit udp any any eq isakmp
>> >>>>>>> permit tcp any any eq 22
>> >>>>>>> permit udp any eq bootps any eq bootpc
>> >>>>>>> permit icmp any any echo
>> >>>>>>> permit icmp any any echo-reply
>> >>>>>>> permit icmp any any traceroute
>> >>>>>>> permit gre any any
>> >>>>>>> permit esp any any
>> >>>>>>> permit tcp any any eq 5001
>> >>>>>>> permit tcp any any eq www
>> >>>>>>> permit tcp any any eq 8080
>> >>>>>>> permit udp any any eq non500-isakmp
>> >>>>>>> !
>> >>>>>>> logging trap errors
>> >>>>>>> logging source-interface FastEthernet0/1
>> >>>>>>> logging 10.1.80.5
>> >>>>>>> access-list 150 permit ip 10.1.0.0 0.0.255.255 any
>> >>>>>>> !
>> >>>>>>> !
>> >>>>>>> !
>> >>>>>>> !
>> >>>>>>> !
>> >>>>>>> control-plane
>> >>>>>>> !
>> >>>>>>> !
>> >>>>>>> !
>> >>>>>>> voice-port 0/0/0
>> >>>>>>> trunk-group FXOPORTS
>> >>>>>>> echo-cancel coverage 32
>> >>>>>>> timeouts interdigit 7
>> >>>>>>> connection plar opx 102
>> >>>>>>> description 770-892-5514
>> >>>>>>> caller-id enable
>> >>>>>>> !
>> >>>>>>> voice-port 0/0/1
>> >>>>>>> trunk-group FXOPORTS
>> >>>>>>> echo-cancel coverage 32
>> >>>>>>> timeouts interdigit 7
>> >>>>>>> connection plar opx 102
>> >>>>>>> caller-id enable
>> >>>>>>> !
>> >>>>>>> !
>> >>>>>>> no mgcp timer receive-rtcp
>> >>>>>>> mgcp fax t38 ecm
>> >>>>>>> mgcp behavior g729-variants static-pt
>> >>>>>>> !
>> >>>>>>> !
>> >>>>>>> dspfarm profile 1 transcode
>> >>>>>>> associate application SCCP
>> >>>>>>> !
>> >>>>>>> !
>> >>>>>>> dial-peer voice 501 pots
>> >>>>>>> trunkgroup FXOPORTS
>> >>>>>>> description Services
>> >>>>>>> destination-pattern [2-8]11
>> >>>>>>> progress_ind setup enable 3
>> >>>>>>> progress_ind progress enable 8
>> >>>>>>> forward-digits all
>> >>>>>>> !
>> >>>>>>> dial-peer voice 511 pots
>> >>>>>>> trunkgroup FXOPORTS
>> >>>>>>> description local seven digit
>> >>>>>>> destination-pattern [2-9]......
>> >>>>>>> progress_ind setup enable 3
>> >>>>>>> progress_ind progress enable 8
>> >>>>>>> forward-digits all
>> >>>>>>> !
>> >>>>>>> dial-peer voice 521 pots
>> >>>>>>> trunkgroup FXOPORTS
>> >>>>>>> description local ten digit
>> >>>>>>> destination-pattern 770.......
>> >>>>>>> progress_ind setup enable 3
>> >>>>>>> progress_ind progress enable 8
>> >>>>>>> forward-digits all
>> >>>>>>> !
>> >>>>>>> dial-peer voice 531 pots
>> >>>>>>> trunkgroup FXOPORTS
>> >>>>>>> description long distance
>> >>>>>>> destination-pattern [2-9]........
>> >>>>>>> progress_ind setup enable 3
>> >>>>>>> progress_ind progress enable 8
>> >>>>>>> forward-digits all
>> >>>>>>> !
>> >>>>>>> dial-peer voice 571 pots
>> >>>>>>> trunkgroup FXOPORTS
>> >>>>>>> description long distance with one
>> >>>>>>> destination-pattern 1[2-9]........
>> >>>>>>> progress_ind setup enable 3
>> >>>>>>> progress_ind progress enable 8
>> >>>>>>> forward-digits all
>> >>>>>>> !
>> >>>>>>> dial-peer voice 541 pots
>> >>>>>>> trunkgroup FXOPORTS
>> >>>>>>> description toll free distance
>> >>>>>>> destination-pattern 1[800,866,877,888].......
>> >>>>>>> progress_ind setup enable 3
>> >>>>>>> progress_ind progress enable 8
>> >>>>>>> forward-digits all
>> >>>>>>> !
>> >>>>>>> dial-peer voice 551 pots
>> >>>>>>> trunkgroup FXOPORTS
>> >>>>>>> description premium distance
>> >>>>>>> destination-pattern 1[900,976].......
>> >>>>>>> progress_ind setup enable 3
>> >>>>>>> progress_ind progress enable 8
>> >>>>>>> forward-digits all
>> >>>>>>> !
>> >>>>>>> dial-peer voice 561 pots
>> >>>>>>> trunkgroup FXOPORTS
>> >>>>>>> description international
>> >>>>>>> destination-pattern 011...........
>> >>>>>>> progress_ind setup enable 3
>> >>>>>>> progress_ind progress enable 8
>> >>>>>>> forward-digits all
>> >>>>>>> !
>> >>>>>>> dial-peer voice 911 pots
>> >>>>>>> trunkgroup FXOPORTS
>> >>>>>>> description 911 Call
>> >>>>>>> destination-pattern 911
>> >>>>>>> forward-digits all
>> >>>>>>> !
>> >>>>>>> dial-peer voice 1000 pots
>> >>>>>>> description incoming Call
>> >>>>>>> preference 1
>> >>>>>>> incoming called-number 7708925414
>> >>>>>>> port 0/0/0
>> >>>>>>> !
>> >>>>>>> dial-peer voice 1001 pots
>> >>>>>>> description incoming Call backup
>> >>>>>>> preference 2
>> >>>>>>> incoming called-number 7708925413
>> >>>>>>> port 0/0/1
>> >>>>>>> !
>> >>>>>>> dial-peer voice 100 voip
>> >>>>>>> description 1xx extension to PUBLISHER
>> >>>>>>> preference 1
>> >>>>>>> destination-pattern 1..
>> >>>>>>> progress_ind setup enable 3
>> >>>>>>> progress_ind progress enable 8
>> >>>>>>> voice-class h323 50
>> >>>>>>> session target ipv4:10.1.80.6
>> >>>>>>> dtmf-relay h245-alphanumeric
>> >>>>>>> codec g711ulaw
>> >>>>>>> no vad
>> >>>>>>> !
>> >>>>>>> dial-peer voice 101 voip
>> >>>>>>> description 1xx extension to subscriber
>> >>>>>>> preference 2
>> >>>>>>> destination-pattern 1..
>> >>>>>>> progress_ind setup enable 3
>> >>>>>>> progress_ind progress enable 8
>> >>>>>>> voice-class h323 50
>> >>>>>>> session target ipv4:10.1.80.7
>> >>>>>>> dtmf-relay h245-alphanumeric
>> >>>>>>> codec g711ulaw
>> >>>>>>> no vad
>> >>>>>>> !
>> >>>>>>> !
>> >>>>>>> !
>> >>>>>>> !
>> >>>>>>> gatekeeper
>> >>>>>>> shutdown
>> >>>>>>> !
>> >>>>>>> !
>> >>>>>>> line con 0
>> >>>>>>> line aux 0
>> >>>>>>> line vty 0 4
>> >>>>>>> privilege level 15
>> >>>>>>> transport input ssh
>> >>>>>>> line vty 5 15
>> >>>>>>> privilege level 15
>> >>>>>>> transport input ssh
>> >>>>>>> !
>> >>>>>>> scheduler allocate 20000 1000
>> >>>>>>> end
>> >>>>>>> Cisco2801#
>> >>>>>>> Cisco2801#
>> >>>>>>> Cisco2801#
>> >>>>>>>
>> >>>>>>> On Wed, Sep 16, 2009 at 12:14 PM, Dane Newman
>> >>>>>>> <dane.newman at gmail.com>
>> >>>>>>> wrote:
>> >>>>>>>>
>> >>>>>>>> I have the same issue
>> >>>>>>>>
>> >>>>>>>> When I call comes into my fxo port I get unknown number Can
>> >>>>>>>> anyone
>> >>>>>>>> assist with this? Im using CUCM 7.0 and a 2801 h323 gateway
>> >>>>>>>>
>> >>>>>>>>
>> >>>>>>>> voice-port 0/0/0
>> >>>>>>>> trunk-group FXOPORTS
>> >>>>>>>> echo-cancel coverage 32
>> >>>>>>>> timeouts interdigit 7
>> >>>>>>>> connection plar opx 500
>> >>>>>>>> description ******
>> >>>>>>>> caller-id enable
>> >>>>>>>>
>> >>>>>>>> On Tue, Sep 15, 2009 at 4:33 PM, Ratko Dodevski
>> >>>>>>>> <rade239 at gmail.com>
>> >>>>>>>> wrote:
>> >>>>>>>>>
>> >>>>>>>>> I forgot to mention that i use H323 gateway and CUCM 7
>> >>>>>>>>>
>> >>>>>>>>>
>> >>>>>>>>>
>> >>>>>>>>> On Tue, Sep 15, 2009 at 9:31 PM, Ratko Dodevski
>> >>>>>>>>> <rade239 at gmail.com>
>> >>>>>>>>> wrote:
>> >>>>>>>>>>
>> >>>>>>>>>> Hi, does anyone had already this kind of problem. A have my GSM
>> >>>>>>>>>> adapter on plugged into VIC2-2FXO card and all incoming calls
>> >>>>>>>>>> are
>> >>>>>>>>>> representing as External Dial Unknown Number. Here is my
>> >>>>>>>>>> voice-port config
>> >>>>>>>>>> and dial-peer. Also, is there a way to use FXS ports instead?
>> >>>>>>>>>>
>> >>>>>>>>>> voice-port 0/3/0
>> >>>>>>>>>> supervisory disconnect anytone
>> >>>>>>>>>> cptone DE
>> >>>>>>>>>> timeouts call-disconnect 0
>> >>>>>>>>>> timeouts ringing 30
>> >>>>>>>>>> timeouts wait-release 5
>> >>>>>>>>>> connection plar 101
>> >>>>>>>>>> impedance complex2
>> >>>>>>>>>> bearer-cap Speech
>> >>>>>>>>>> caller-id alerting dsp-pre-allocate
>> >>>>>>>>>>
>> >>>>>>>>>> dial-peer voice 70 pots
>> >>>>>>>>>> destination-pattern 070......
>> >>>>>>>>>> direct-inward-dial
>> >>>>>>>>>> port 0/3/0
>> >>>>>>>>>> prefix 070
>> >>>>>>>>>>
>> >>>>>>>>>> Any help would be appreciated.
>> >>>>>>>>>>
>> >>>>>>>>>> Regards
>> >>>>>>>>>>
>> >>>>>>>>>> --
>> >>>>>>>>>> Ratko
>> >>>>>>>>>
>> >>>>>>>>>
>> >>>>>>>>>
>> >>>>>>>>> --
>> >>>>>>>>> Ratko
>> >>>>>>>>>
>> >>>>>>>>> _______________________________________________
>> >>>>>>>>> cisco-voip mailing list
>> >>>>>>>>> cisco-voip at puck.nether.net
>> >>>>>>>>> https://puck.nether.net/mailman/listinfo/cisco-voip
>> >>>>>>>>>
>> >>>>>>>>
>> >>>>>>>
>> >>>>>>
>> >>>>>>
>> >>>>>>
>> >>>>>> --
>> >>>>>> Ratko
>> >>>>>
>> >>>>>
>> >>>>>
>> >>>>> --
>> >>>>> Ratko
>> >>>>
>> >>>>
>> >>>>
>> >>>> --
>> >>>> Ratko
>> >>>
>> >>
>> >
>> >
>> > _______________________________________________
>> > cisco-voip mailing list
>> > cisco-voip at puck.nether.net
>> > https://puck.nether.net/mailman/listinfo/cisco-voip
>> >
>> >
>
>
More information about the cisco-voip
mailing list