[cisco-voip] Phone proxy -- CM

[Scott Voll]

The Phone Proxy was just so easy to use....... the ASA version is just more
over head.......
Guess I have to start moving remote uses............ What a Pain in the #$$.

Who's using the ASA version?  using CM 7.1 or 6.1 with it?  What version of
ASA OS are you using?

Scott

On Fri, Sep 18, 2009 at 8:03 AM, Chris Ward (chrward) <chrward at cisco.com>wrote:

>  It’s TAC supported, but only on what is currently documented (versions,
> features, etc…). However, there is no sustainment.
>
>
>
> Not a good situation, I agree.
>
>
>
> -Chris
>
>
>
> *From:* Scott Voll [mailto:svoll.voip at gmail.com]
> *Sent:* Friday, September 18, 2009 10:49 AM
> *To:* Chris Ward (chrward)
> *Cc:* cisco-voip at puck.nether.net
> *Subject:* Re: [cisco-voip] Phone proxy -- CM
>
>
>
> what's up with that.... I knew they EoS it about 6 months after it came
> out..... but isn't there support for like 3 or 4 years after, before they
> stop supporting it?
>
>
>
> Scott
>
> On Fri, Sep 18, 2009 at 6:22 AM, Chris Ward (chrward) <chrward at cisco.com>
> wrote:
>
> Hi Scott,
>
>
>
> Phoneproxy(Standalone) has been deprecated and is EOL. It has been replaced
> by Phoneproxy(ASA).
>
>
>
> If it works with 7.1 then that’s fine, if it doesn’t, you are on your own.
> I suspect there might be some issues since we made a jump in SCCP versions
> to support IPv6 in 7.1.
>
>
>
> You may need to investigate getting an ASA or adding the feature to an ASA
> you already own as the original Phoneproxy isn’t developed anymore. Sorry
> for the bad news. But hey, it’s Friday right?
>
>
>
> -Chris
>
>
>
> *From:* cisco-voip-bounces at puck.nether.net [mailto:
> cisco-voip-bounces at puck.nether.net] *On Behalf Of *Scott Voll
> *Sent:* Thursday, September 17, 2009 6:48 PM
> *To:* cisco-voip at puck.nether.net
> *Subject:* [cisco-voip] Phone proxy -- CM
>
>
>
> I have the Phone proxy appliance and CM 6.1.2 setup and working.
>
>
>
> I'm looking to upgrade to CM 7.1.  But I can't find in any of the
> documentation if it's supported and if I need to upgrade to 1.0.4 to get it
> supported.  Any idea where I can find that kind of info?
>
>
>
> I've looked through the PP release notes and admin guide with no success.
>
>
>
> Thanks
>
>
>
> Scott
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090918/93e98823/attachment.html>