[cisco-voip] Updating BAT tool?

[Chris Ward (chrward)]

I suspect this is CSCsj37299. 4.1.3sr8 would have the fix.

-Chris


-----Original Message-----
From: Dane [mailto:dane at pktloss.net] 
Sent: Tuesday, September 22, 2009 1:02 PM
To: Chris Ward (chrward)
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Updating BAT tool?

4.1(3)sr5d


On Tue, Sep 22, 2009 at 11:47 AM, Chris Ward (chrward)
<chrward at cisco.com> wrote:
> Dane,
>
> I believe this is a known issue. Do you have the exact CUCM version?
>
> -Chris
>
> -----Original Message-----
> From: cisco-voip-bounces at puck.nether.net
> [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Dane
> Sent: Tuesday, September 22, 2009 12:39 PM
> To: cisco-voip at puck.nether.net
> Subject: [cisco-voip] Updating BAT tool?
>
> Ok, I am confused.  I seem to have an issue with BAT.  I can't seem to
> create a new phone template in BAT for new 7962 phones.  When I do I
> get a popup that has a yellow yield sign with ! in it that says "Error
> No."  thats it.  No actual error number.
>
> I can add a new template if I choose 7960 as the phone type.  Can't add
> 7962's.
>
> I go to look at updating BAT and the only versions I see available are
> older then the version I apparently have?
>
> CallManager 4.1(3)
> BAT 5.1(4c)
>
>
> Kinda confused.  This could make things difficult for tonights
> deployment.  Ughh
>
> Any thoughts?
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>