[cisco-voip] interface vlan x give me Unrecognized command

[Matthew Loraditch]

A router won't have the VLAN command unless it has a switching card (like HWIC-ESW4). If you need to do vlans on one of the regular interfaces you have to do dot1q subinterfaces


Matthew Loraditch
1965 Greenspring Drive
Timonium, MD 21093 
support at heliontechnologies.com
(p) (410) 252-8830
(F) (443) 541-1593

Visit us at www.heliontechnologies.com 
Support Issue? Email support at heliontechnologies.com for fast assistance!


-----Original Message-----
From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Ahmed Abdullahi
Sent: Wednesday, September 23, 2009 1:30 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] interface vlan x give me Unrecognized command

Dumb question I know, but I can't figure it out.  When I run

router(config)# interface vlan 61

I get "invalid input detected at 'vlan'?

I'm running c3725-adventerprisek9_ivs-mz.124-15.T6

Thanks.
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip