[cisco-voip] CUCM 6.X Block offnet-to-offnett transfer per user/device

[Anthony Kouloglou]

Hi Lelio,
thanks for the answer. But both these solutions require that the user 
enters a valid code before placing the call.
When the user wants to put call forward all to an off net destination, 
how can this be accomplished?

Thanks
Anthony

Lelio Fulgenzi wrote:
> Take a look at FACs and/or CMCs and/or both. For FACs, FACs do not 
> appear in the CDR, only the description. CMCs appear in the CDR.
>
> ---
> Lelio Fulgenzi, B.A.
> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
> (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> "Bad grammar makes me [sic]" - Tshirt
>
>
> ----- Original Message -----
> From: "Anthony Kouloglou" <akoul at dataways.gr>
> To: "cisco-voip at puck-nether.net" <cisco-voip at puck.nether.net>
> Sent: Wednesday, September 23, 2009 4:43:01 AM GMT -05:00 US/Canada 
> Eastern
> Subject: [cisco-voip] CUCM 6.X Block offnet-to-offnett transfer per 
> user/device
>
> Hi,
> i have read and used in my configurations that if you want to block
> offnet-to-offnet transfers you just set the appropriate parameter to true.
> But what if you want to control this feature as per device or per user
> basis?
> I have a CUCM 6.1 but the question could be asked to all CUCM configs i
> guess.
>
> Thanks and Kind Regards
> Anthony
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip