[cisco-voip] 7914 Line vs. Speed Dial ?

[Mathew Miller]

Set the lines of as BLF Speed dials. You will then be able to monitor  
and use them as a speed dial.

Matt
On Sep 24, 2009, at 11:34 AM, Dane wrote:

> I think I know the answer to this, but need to confirm with others.
>
> Moved some admin assistants from an older phone system and set them up
> with 7962s with 7914 ext. modules.
>
> I set the ext. modules up as all speed dials.  They claim that on the
> old phones / phone system the buttons on those ext. modules acted as
> both a line and speed dial?  They could see the state of the line on
> the button but could also press the button to call the person.
>
> I don't think (but haven't tried, not onsite today) if you configure a
> button on the 7914 as a line to see the state of the line you cant
> press the button to call that user as well.  That would be acting as a
> speed dial right?
>
> And speed dial buttons don't show the state of the line right?
>
> They want one line to do both like the old phones and I am not sure I
> can do that.
>
> I will try playing tomorrow when I am back over there but thought I
> would ask in the mean time.
>
> thanks,
> dane
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip