[cisco-voip] DMA and upgrade at the same time?

Wes Sisk wsisk at cisco.com
Mon Sep 28 14:07:08 EDT 2009


Hi Lelio,

Some thunderbird prowess finally provided the answer:

********************
You can't do an upgrade during a W1.  You can do an upgrade followed by 
a W1 only if the DMA tarball was created for the version of software you 
upgraded to.  If it was not, you will most likely hit a DB failure.  If 
the software upgraded to is 6.1.2+, the W1 failure most likely would be 
due to detection of invalid DMA version versus active version.
********************

I also confirmed that a few individuals in TAC have observed successes 
performing upgrade and import.  These were primarily motivated by the 
availability of bootable media. For example:

1. use dma 7.1.3 to export your CM4.1.3 data
2. boot from your CM7.0.2 bootable media
3. select to upgrade during install
4. point to cm713 upgrade file on sftp server
5. let install proceed, it will trigger another reboot
6. after reboot install will start again. at this point select to import 
windows data and point to dma file on sftp server

Key being that you used dma for 7.1.3 and used CM version 7.1.3 as the 
final destination version.  This is just a workaround for not having 
7.1.3 bootable media.

Regards,
Wes

On Monday, September 28, 2009 1:05:37 PM, Lelio Fulgenzi 
<lelio at uoguelph.ca> wrote:
> ugh.
>
> ---
> Lelio Fulgenzi, B.A.
> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
> (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> "Bad grammar makes me [sic]" - Tshirt
>
>
> ----- Original Message -----
> From: "Matthew Loraditch" <MLoraditch at heliontechnologies.com>
> To: "Lelio Fulgenzi" <lelio at uoguelph.ca>, "Wes Sisk" <wsisk at cisco.com>
> Cc: "cisco-voip voyp list" <cisco-voip at puck.nether.net>
> Sent: Monday, September 28, 2009 12:55:23 PM GMT -05:00 US/Canada Eastern
> Subject: RE: [cisco-voip] DMA and upgrade at the same time?
>
> DMA Import is at install only so you will have to install and dma and 
> then upgrade after you complete the install
>
>  
>
>  
>
> *Matthew Loraditch*
> 1965 Greenspring Drive
>
> Timonium, MD 21093
> support at heliontechnologies.com <mailto:support at heliontechnologies.com>
> (p) (410) 252-8830
> (F) (443) 541-1593
>
> Visit us at www.heliontechnologies.com 
> <http://www.heliontechnologies.com>
> Support Issue? Email support at heliontechnologies.com 
> <mailto:support at heliontechnologies.com> for fast assistance!
>
>  
>
> *From:* cisco-voip-bounces at puck.nether.net 
> [mailto:cisco-voip-bounces at puck.nether.net] *On Behalf Of *Lelio Fulgenzi
> *Sent:* Monday, September 28, 2009 12:53 PM
> *To:* Wes Sisk
> *Cc:* cisco-voip voyp list
> *Subject:* Re: [cisco-voip] DMA and upgrade at the same time?
>
>  
>
> ok. thanks. can i do a DMA import after an installation + upgrade is 
> completed? or does DMA import have to be done at install time?
>
> ---
> Lelio Fulgenzi, B.A.
> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
> (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> "Bad grammar makes me [sic]" - Tshirt
>
>
> ----- Original Message -----
> From: "Wes Sisk" <wsisk at cisco.com>
> To: "Lelio Fulgenzi" <lelio at uoguelph.ca>
> Cc: "cisco-voip voyp list" <cisco-voip at puck.nether.net>
> Sent: Monday, September 28, 2009 12:26:14 PM GMT -05:00 US/Canada Eastern
> Subject: Re: [cisco-voip] DMA and upgrade at the same time?
>
> I believe DMA import + upgrade at same time are unsupported:
> example: dma 4.1, begin install of 7.0, select import windows, and 
> select to apply additional patches (7.1).
>
> I am looking for supporting documentation.
>
> /Wes
>
> On Monday, September 28, 2009 10:03:50 AM, Lelio Fulgenzi 
> <lelio at uoguelph.ca> <mailto:lelio at uoguelph.ca> wrote:
>
> Sorry if I posted this already....
>
> Does anyone know if you can do both a DMA and upgrade at the same time 
> when installing v7.0 ?
>
> I know I can go through the installation steps myself, but I'm hoping 
> someone will share their experience, secrets or guess.
>
>
> ---
> Lelio Fulgenzi, B.A.
> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
> (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> "Bad grammar makes me [sic]" - Tshirt
>
>
>
> ------------------------------------------------------------------------
>
>
>  
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net <mailto:cisco-voip at puck.nether.net>
> https://puck.nether.net/mailman/listinfo/cisco-voip
>   
>
>  
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090928/dc401b05/attachment.html>


More information about the cisco-voip mailing list